It's somewhat rotten that your dealer cut the belt rather than unbolt the assembly to relieve tension and get things working again.
There are not a lot of these models out there. I wonder if...
It's somewhat rotten that your dealer cut the belt rather than unbolt the assembly to relieve tension and get things working again.
There are not a lot of these models out there. I wonder if...
The car does not have spectacular handling, but it's hardly out of control. A little self centering on the steering would be welcome. But said steering certainly turns the car in an incredibly...
I don't understand all the negativity around the CVT either. When I had the 2015 from Mitsu, it was a pretty nice, and I loved the way the CVT fairly aggressively kept RPMs low for good fuel...
This is my attempt to condense all of the engine block heater information (including pictures and installation instructions) into a single post. Hopefully having this info in one spot will help...
i think itsreally the motor. its just like an ordinary electric fan wherein the longer you use it, it tends to stop when the motor is like worn out or out of oil. our blower has a part number maybe...
This would have helped me that one time I looked down for a single second in dead rush hour.
As a regular bike rider, this feature can't come fast enough. Unfortunately, people are not going to stop staring at their phones instead of the road and as automakers continue to put more...
Be aware also that knowingly operating an overloaded vehicle (exceeding gvwr) is highly illegal and no matter how defensively you drive if there's an accident you are criminally liable for damages,...
Bill Penney Mitsubishi - Huntsville, AL
I must agree as I'm in a similar place. Lately, I've slowed down my driving a lot. I used to drive hard & fast.
For a very long time I had at least one speeding ticket on my driving record. ...
It sounds like you are having some communication problems with your dealer. I'm sorry you have to face this. Some dealers and their service centers are more helpful and customer-focused than...
I agree .. the design of the support is flawed .. both strut bolts should be incorporated into the bracket for rigidity.
Try removing the ETD leaving just the support and try to hammer the support...
Please check for the IOD fuse to be fully inserted.
The small plastic door/cover in front of driver's left knee pops out with a small screw driver of knife.
Then you will see a yellow plastic...
flatbroke, thanks for posting that clutch replacement info. Going to copy it into a dedicated thread which will make it easier for people to find in the future.
6335
Here's the first U.S. "professional" auto reviewer's take on the revised Mirage.
I see Mitsu still hasn't learned their lesson: they should not be loaning Mirage CVT's to auto writers.
...
Hej kidinme
please do not use this screwdriver you will damage the plastic air vent and dashboard.you need plastic tools.you can buy them in auto shops or e bay.you need 2 pieces 2...
I added a Magnet Bra to my Mirage today630163026303
Flatbroke, mind your own business. You can drive your car like a little old lady, secure in the knowledge that your warranty shall never be voided. You don't need to come here and crap all over...
Just thought I would chime in. I purchased a set of Toyo Extensa A/S tires from treaddepot.com last November. They are 185/60r14, and I got a screaming deal. They were having a Black Friday sale plus...
Hello all my name is taxi Dave I run 4 mirage as taxicab in the Tampa Florida area. I have run Ford's for years, but when my dealer showed me the mirage I thought is was a circus can car but...
Mine are still going strong at 57,000 km and they are evenly worn within 1mm of each other. I rotate them every 16,000 km.
I run them summer and winter about 100 km a day, mostly just me in the car....
That's the outer tie rod end.
i hate to say this but its probably your imagination lol
most roads aren't flat, your steering wheel will move its "center" depending which way the car leans due too the road.
check your tire...
Yep, I'm currently a full-time tech, but I'm leaving the backshop for a sales position at another shop, since my current employer is a sinking ship and closing stores, and constant exposure to...
Yeah, ability to ecodrive without affecting other drivers depends a lot on local driving "culture".
I'm really lucky I happen to live in a very laid-back, little city (also, lots of seniors). ...