Search:

Same here. Not paying this retard for his useless opinions. He owes the Mirage community every cent he ever made for his totally wrong ramblings

That's nearly $200 I save with the Rotallas.
That will pay for my rebuilt alternator and a new serpentine belt.

A lot has changed in my province and buying another car, getting it certified may...

Sure, just make sure to bring plenty of raccoon grits and smoked possum!
oh, and a signed pic of Ironhead

Try living in a snowbelt where 7 FEET can fall in one go. No rear window heater in the world is hot enough to keep the window clear during our intense falls.

For close to a year I was fairly certain I had the defective exhaust hanger. The rattling noises from the front and underside were just like the recordings I heard of the bad hangers.

So....

I...

I know from personal experience you go the extra mile to help people out. I don't have a solution to the "killing mosquito's with a .50" That's what I call it when you bend over backwards to help...

Wow.

That was one of the easier brake jobs I have done. It was 3c outside. That was not pleasant.

Since both my long coma and various ops I have slowed down considerably. It took me 3 hours for...

Ugh, the total lack of common courtesy exhibited by these buffoons is astounding! You can bet if you sold something out from under them the same way they do they'd be on your back for weeks digging...

I'm spitting nails about now
I made a deal with a guy to buy an item and told him I really had to run a couple errands that were time sensitive and he'd get paid via EMT within 2 hours.
I get home...

I can confirm the first kit will likely be worth more than many of the cars it gets installed on.

What with the accents and the language being spoken and the flimsy nature of all those POS I was CERTAIN it was Ontario until I realized, BAMBOO doesn't grow here

Large number of stolen cars recovered, many in a warehouse a short drive from me.
...

You own the plates in Ontario and keep them when you sell or trade the car. Any Ontario plated car outside of Ontario is stolen, simple as.

Kelvin ;)

On the topic of antennas I found this great pic. I don't know what country it is, but how high is that thing?

My guess is 20 feet from the ground to the antenna tip.26779

I started out the summer hoping to update 1 radio, add 1 radio and put up 2 antennas. Total cost perhaps $1000

I see according to my records I've spent >$11,000 since May.

Offset that by the...

That's a cool approach! Combine the best of the old with the new. Most CB were actually made pretty darn good. There were cut rate rigs but the branded stuff was good.

Most of the problems can be...

If you are referring to the lower right rig that's an Icom IC7000. It sure looks like a G90 doesn't it? Makes me think the G90 guys looked at the Icom and figured since it's out of production for 15...

As Johnny says, always buying and selling. You do it right and you can usually come out a bit ahead each time. The secret is buying a lot when an older ham passes and most remaining family just want...

Second part:

This is my ham station under construction. Most of my gear has sat in boxes since 2020 when covid hit. I should have spend all my spare time on the radio but IIRC the bands were...

I recently bought 2 gadgets for what is a cheap price in the ham world for what they do

The meter is specifically geared to 1-60Mhz, that puts it's center of measurement almost smack in the middle...

Let's face it. Mits know tech.
The only, only reason the Zero was knocked off the top tier perch in WWII was America introducing birds with 2,400hp double wasp radials. Both the F6F and Corsair had...

Creepers rule. Either that or a $3,500 lift. I'll take the creeper. Besides, I can sleep under the car and pretend I'm working.

Been there with several cars. Drop parts wherever I went.

As for me for today with the Mirage I spend an hour with a giant 3 magnet antenna mount on the roof with a pseudo-antenna attached driving...

Kawasaki engines had buckets. You needed a kit with hundreds of buckets before you began work on your Z1. Ugh. I hated that. Are you sure the chain system is at fault? You would only be the 2nd...