I know from experience that you can do lots of dumb things with an angle grinder and a welder.
I know from experience that you can do lots of dumb things with an angle grinder and a welder.
If you ask daox he might be might give you some answers. The maf housing has a 2" diameter. It say so here: https://www.amazon.com/dp/B072LNMKDW. Should be pretty easy to figure out the rest from...
That color is so striking on the mirage. I'm drooling over here.
Had a blast at cars and coffee and people had no idea what I was driving but she was pretty popular with the crowd XD and also put on my front flaps and removed the rear seats
9608
9609
9610
I installed a Raspberry Pi with RetroPie in my '15 Mirage. I have games on there for NES, SNES, GBC, and GBA. I'm still playing around with it, but plan to mount it behind the glove box, when I am...
Any additional things or wiring added to a vehicle, esp on the exterior, needs to be wired as close to OEM looking as possible. Wiring needs to be reliable. It should be water-tight and mounted. Take...
Thanks for the solution for my dash lighting up like the eiffel Tower. :P
I knew it was a problem of the load difference but did not know yet what resistor i must use.
Now i do and will order...
Beautiful. I need those headlights and tail lights
Fit can be tricky. Another forum member put some on and as Gnarles2 illustrated, they turned out great. The trim rings, that is. However, I think his source ran out and found they were no longer...
http://mirageforum.com/forum/attachment.php?attachmentid=8687&d=1491332466
They go with hood scoops.
This is a members car and he did a good job with the factory wheels. Painted them and added chrome trim rings. 8686
Spray painting hubcaps? My first time hearing that.
Sure it can be done for under $300, break off the key in the ignition in the run position and run toggle switches for your ign/acc then a push button for the starter. Might be kinda easy to steal...