Nice video..
My car is fitted only with the narrow band sensor .. normal values fluctuate from 0.1-0.9V
https://youtu.be/1wB2R73luqY
You can also view the following links for comparison...
Nice video..
My car is fitted only with the narrow band sensor .. normal values fluctuate from 0.1-0.9V
https://youtu.be/1wB2R73luqY
You can also view the following links for comparison...
looks like this one fits
26122
Pico 2 Wire Backup Socket for 1156 Bulb
Pico Light Bulb Sockets 5412PT
Try this site
https://www.paintscratch.com/touch_up_paint/Mitsubishi/2015-Mitsubishi-Mirage.html
Hey @Gajeel can you take throttle opening values (using Torque App) for various RPMs, say 1K and 2K, at NORMAL mode and another reading at POWER mode for comparison?
Also, can you try revving up...
MPH has gone inactive .. even at FB
https://i.imgur.com/FLxz7Ey.jpg
I can only imagine the man felt a headache when he saw the proposed replacement part.. LOL
https://i.imgur.com/75CkEKs.jpg
Most commentators ruled out the oxygen sensor but I would still...
Maybe you can find a shop to do temperature measurement on the catalytic converter using an infrared thermometer to assess performance of the cat.
Testing Catalytic Converters
"To test...
the idea is to monitor the output voltage of the sensors at various RPMs if they are operating normally or not.
The FSM gives the oxygen sensor as one possible cause of P0421, however, as there...
@littlemoule...
prior to doing anything like DTC reset, can you observe first the behavior of both AFR sensor and O2 sensor across the RPM range.
Maybe you can select/set the parameters that...
@littlemoule - the Mirage has only 1 bank. The fuel injector you have replaced is on cylinder 1. Bank 1 covers all of the 3 cylinders. Maybe the 2nd of 2 codes can give additional clue of the fault....
I think the other sensor is this one..
https://i.imgur.com/aoBw8I8h.jpg
I am of the opinion that P13W bulb lumens output is weak and will not give the brightness the H8 bulb gives and therefore is not intended to be used as a fog light. Hence, it is wired as a DRL....
agree on that.. the objective here is to find legit ones that are cheaper.
Mitsumi experienced problems using the aftermarket plugs he purchased online prompting him to post here at the forum.
...
could be web server problem or there might be limitation to the number of files and/or size being uploaded?
You can try the Free Cloud image hosting site that I use.. previously I used imgur.com...
Do w/ the tail lights first.
This sparked my interest in battery technology .. I have yet to find datasheets for 6S LTO.
found this on Quora
... the pulley ratio between the crankshaft and alternator is kept at 3:1 for...
I don't clearly understand what you have in mind..I honestly believe there will be no problem with the OEM alternator but rather in the battery setup you intend to do..
If you'll build a starter...
still, I would suspect a weak battery.
Maybe you can try a branded one, too:
CR2032 Battery (2 pack) - Panasonic, Lithium Coin Cell, 3V
Varta Lithium Button Cell Battery
https://imgpile.com/images/w3A4Mj.png
No, you may not! They are not interchangeable.
https://imgpile.com/images/wHWC68.md.png
The ground wire is part of the Voltage Regulator IC electrical circuit. If you cut the Ground wire, I believe it will throw a DTC P0622.
The stator connection appears to be common (or...
@bemeana.. do you have any device like throttle controller plugged into the pedal sensor?
@Cool Silver,
From your description - the brake light switch is normally-open (NO) while the ECU switch part is normally-closed (NC). This makes me think one of the wires of the NC switch has an...
best answered on this thread
windshield washer tank fix (won't fill completely)