https://mirageforum.com/forum/showthread.php/9867-How-to-add-cruise-control-indicator-on-instrument-cluster
https://mirageforum.com/forum/showthread.php/9867-How-to-add-cruise-control-indicator-on-instrument-cluster
Yes, you need XHorse driver for miniVCI. Download from here, rename the file and add .zip extension.
AFAIK It needs different driver, tha paid one from Kolyandex forum.
1. You need a mini vci cable connected to Windows PC with XHorse driver.
2. Kolyandex Forum here
I no longer use ETACSdecoder because after several months of not logging in, my credits always...
I think it will work.
No, all manual Mirage here are lowest trim, they have prehistoric key 🤣 also no alarm and immobilizer.
About AUD 550
I asked my friend who has manual Mirage, part number 1860C466
KYB EXCEL G, front: 3320010, rear: 348083
I think the specs in Australia are the same as in Indonesia, maybe it's better for you to look for parts from Indonesia. You can try to contact @mitsubishi_mirage_part on Instagram.
Or you can replace your ECM with 2014+ (model with radio antena on the back).
Your ECM does not support cruise control since there's no 5v output.
I haven't had the chance to compare the 2012 vs 2014 ECM PCB, whether it's only missing 1 or 2 components to enable 5v output....
Ah, I forget if it has code for clockspring with steering angle sensor and without.
But if it has 10 pins at c306, it will be same at c301
I just read the previous post. I think yours is a 2012 model because it has a complete clockspring and no cruise wire running to ECM.
First thing you need to check is whether your ECM has 5v output...
Yours already has 2 ribbon inside (complete 10 pins) for cruise control.
It's normal
I have the yellow sharp tone horns, put it behind the grille to make it tidier.
25434
Yes I think it'll fit. Since the 2022 lights fits on 2012-2017 perfectly, the uranus lights will also fit on a 2022.
It's been a week since I sold my car
25341
Last conditon before I sell the car
25326
25327
25328
25329
25330
25331
25092
25093
25094
Back to stock :)
Check if your clockspring has 10 pins instead of 5 pins https://mirageforum.com/forum/showthread.php/963-Cruise-Control-(adding-to-car-using-OEM-parts-switches)?p=78340&viewfull=1#post78340
You can...
https://www.facebook.com/groups/mmcodingwriter/permalink/4621452624565033/
Yes, it was D5S HID from factory.
I upgrade to factory projector and change the bulb with LED.
24611
24612
Got my KYB Excel-G 348083 from fitinpart.sg, it took 2 months for ordering.
24510
24511
Intalled front stabilizer polyurethane bushings and shorter spacer.
23504
Yes, basically the same process, You only need 3 components as I said above.
23124
23125