MAP Sensor for 1.2L CVT Philippine Spec - Bosch 0 261 230 358
https://farm8.staticflickr.com/7403/13468830354_531aa11fd8_z.jpg
MAP Sensor for 1.2L CVT Philippine Spec - Bosch 0 261 230 358
https://farm8.staticflickr.com/7403/13468830354_531aa11fd8_z.jpg
Mine finally came in:
838
839
840
Some 1/8" foam tape and it was good to go.
I'll add pictures when I redo everything again next month to add Dyna-Mat. The installation is very simple.
You'll need a Trim Panel Removal Kit to follow this guide.
Note: Amazon and other...
I just got my Mirage last Thursday but I ordered the armrest beforehand and i brought it with me when I purchased my car.
I did trim the little plastic piece off the bottem then i did the cut cozie...
Like I said, I don't see any problem with the hand brake. Or if there is any nuisance, it's overshadowed by the convenience of having an arm rest.
...
There were 546 posts made in the 2 week prize period. I used http://www.random.org to select 3 posts...
Prize winner #1: (pull-back Mirage) is festiboi for post #7 in US: 2014 Mirage IIHS crash...
It comes with screws to fasten it down but I didn't want to drill into the cup holder. To make it secure I used a non skid rubber material I had laying around that I put around the inside of the cup...
Today I made wheel covers to block airflow through the factory 14" alloy wheels of the Mirage, in hopes of improving aerodynamics.
...
Hi!
You would think by now new cars would come equipped with LED lights everywhere. That's not the case and it beats me as to why?
It can't be cheaper to make incandescent bulbs than LEDs by...
Finally installed the Ultra Racing Front Lower Bar for the Mirage.
Install time is 30-45 minutes.
What you need:
Ultra Racing Front Lower bar part # UR-LA4-2026...
Here's a DIY Installation of the ULTRA Racing Anti-Roll Bar.
This is relatively easy to do. Install time is around 30min max.
What you need:
Ultra Racing Anti-Roll Bar part# UR-AR19-422
...
Countries listed (so far):
(Have info for other countries? Please comment in this thread.)
Australia
Just a few more :)
http://i451.photobucket.com/albums/qq232/Filesaver1/Screenshot2013-03-19at81040AM_zpsc1b8dc55.png
...
Lets start with the 3A90's specs:
(For info on the 3A92 (1.2L) engine see here: 3A92 Engine Information)
Displacement:
1.0L (999 CC)
This technical drawing was provided in the Mirage brochure (PDF) from Australia:
http://mirageforum.com/forum/attachment.php?attachmentid=40&d=1358620150
It's a decent candidate image to use...
Some more factory pics.
http://i537.photobucket.com/albums/ff332/jamie85063/mirage-factory-main12_zps26214894.jpg...
Could these parts be in your Mirage?
Pics from inside the factory.
http://i537.photobucket.com/albums/ff332/jamie85063/mirage-factory-main03_zps8a73ee4d.jpg...