No I did not.
anyways i was encouraged to create my own by your idea hehe thanks much but not done yet, still has to buy plywood for the top and shape it with the rear trunk to fit.
heres mine
Attachment 4922
Attachment 4923
Attachment 4924
i made the left smaller for the smaller tools and the right for the bigger ones and possibly a cabnet for my shoes used for work hehe.
wew i dont know why the picture is in reverse? the left should be smaller egh! or maybe i put it the other way around hehe sorry my bad.
i'd still need the plywood on top and put a hinge so that it'll be easy to open.
@91cavgt
see mine? its the same wood i used but its a bit high leveled at the top unlike yours thats why i asked if you removed the bottom plastics left and right.
because at my rear trunk when i remove the cover theres this hardyboard on top placed in the center only and on a two plastic pieces placed left and right wherein i can remove it just by sliding it and once reoved thats the time you could see the metal part bottom of the car.
thanks for this DIY!
heres mine done now! for 2 days i was able to finish it!
now with the top cover attached i can now put anything on top hehe.
Attachment 4926
Attachment 4927
Attachment 4928
Attachment 4929
Attachment 4930
Tadaaaa! And thats it!
Attachment 4931