Answerback function
The horn of the keyless entry system answerback function can be changed as required. This is done with the key removed from the ignition switch.
Note |
• The answerback function will not operate if any of the doors are open. |
Horn deactivation/reactivation
The answerback function can be set in the following three ways.
Each time the answerback function is set, a chime will sound to tell you the condition of the answerback function.
One chime: |
The horn will not sound. |
Two chimes: |
The horn will sound. |
Four chimes: |
The horn will sound if the LOCK button is pressed twice within 1 second. |
- Remove the key from the ignition switch.
- Open the driver’s door and turn the combination headlights and dimmer switch to the “OFF” position.
- Press the LOCK button (1) for 4 to 10 seconds and press the UNLOCK button (2) during this time.
- Release in sequence the UNLOCK and LOCK buttons within 10 seconds of pressing the UNLOCK button in step 3.