ScanGauge fuel economy gauge / trip computer
The ScanGaugeII is an extremely compact automotive computer designed to read and display information about your vehicle in real time.
Simply connect the ScanGaugeII to your vehicle through it's OBDII port using the included cable, turn the ignition key and the ScanGaugeII automatically connects to your cars internal computer - it's that simple.
The ScanGaugeII is compatible with all OBDII compliant Mirages.
1) Scan Tool Features:
- Reads Trouble Codes
- Reads conditions that set the Trouble Code
- Clears Trouble Codes
- Turns off the "Check Engine" light
- Tells you when vehicle is "Ready" to pass OBDII testing
- Make and store up to 10 rewritable special codes
to send to the vehicle computer
2) Digital Gauges:
- Instantaneous Horsepower
- Engine Load
- Throttle Position
- Fuel Economy (MPG)
- Ignition Timing
- Battery Voltage
- Coolant Temperature
- Intake Air Temperature
- Engine Speed (RPM)
- Vehicle speed (MPH)
- Manifold Pressure (not available on some vehicles)
- Open/Closed Loop
- Fuel Rate
- Many more...
3) Trip Computer Features:
- Maximum Speed
- Average Speed
- Maximum Coolant Temperature
- Maximum RPM
- Driving Time
- Driving Distance
- Fuel Used
- Trip Fuel Economy
- Distance to Empty
- Time to Empty
- Fuel to Empty
For more info visit: ScanGauge.com
The ScanGaugeE brings you most of the features of the popular ScanGaugeII, but in a smaller package and at a lower cost. It is also geared more toward those who wish to get better mileage and/or reduce their CO2 emissions. With the help of the ScanGaugeE you can see an improvement of up to 33% better gas mileage. That translates directly to saving 33% on your fuel costs! How much do you spend a week on fuel? If you fill up once a week this device could save you up to $10 a week in an Mirage.
Features
- Track Your Fuel Cost
- Monitor Your Carbon Footprint
- Real-time Fuel Economy Feedback Graph
- Goal Based Fuel Economy Feedback Graph
- Use Up To 33% less Fuel
See the comparison chart below to compare features.
For more info visit: ScanGauge.com
Don't have a nice clean way to mount your ScanGauge? Try out the ScanGauge mount. It attaches via a suction cup to any smooth surface. If you don't have a smooth surface, use the included adhesive backed pad to create one. The pivoting head allows you to aim the ScanGauge so it is easy to look at.
