Thanks Satria_wr, but my query is about 8602A110., which is also specified as fitting the Mirage 1.2. As above, I want to make sure I'm buying the right switch. :)
Printable View
Thanks Satria_wr, but my query is about 8602A110., which is also specified as fitting the Mirage 1.2. As above, I want to make sure I'm buying the right switch. :)
I never tried the 110. Afaik the mirage use 088.
I've just finished my mod, on my North American spec '15 Mirage the 088 switch works just fine!
Hi everyone!
Keen to do this on my 2018 Space Star, Mirage's identical twin.
Found that my brake switch is the following, wonder if i will need to change it out for a 8614A183?
http://www.justparts.com/Auto_Parts/...Coupe/32350540
Also there seems to be 4 wires in place..
Some pictures
Attachment 11753
Attachment 11754
Attachment 11755
Check and see if the switch itself has 4 connector blades inside of it. This is the main difference in the brake switch. Here is a comparison shot I took when I did mine.
http://mirageforum.com/forum/attachm...5&d=1517241127
You can't really tell just from the outside.
http://mirageforum.com/forum/attachm...4&d=1517241082
These pictures are from my DIY cruise control install thread.
Yes it seems like it has 4 wires.
My car is an auto, so i guess all i need is a CC Switch, and etacs modification.
Time to buy a CC switch 8602A115 to try it out.
My steering is the one with chrome trims. That should be the part number.
I have totally no idea with ETACS. Shall give it a go tomorrow evening after work..
Thanks Daox!
Attachment 11756
Just installed the cruise control switch, but it does not seem to work even after activating the Cruise Control in ETACS.
The model that i got could possibly be for the Outlander Sport 2016 to 2018.
I see from previous posts that there were resistors to be modified in the cruise control switch.
Does anyone know about this so that we could do a correction?
Some of the outlander ones needed new resistors put in. Some did not. I forget what the difference is though.
This post kind of talks about it:
http://mirageforum.com/forum/showthr...ll=1#post65641
They suspect that the newer(?) ones had the resistors changed and compatible for the mirage.
I will have my cruise control removed and tested using a meter before going ahead..
Fingers crossed..
Attachment 12411
Looked on my 2015 Indonesian Mirage CVT, the brake switch has 4 connectors and from clock spring there are cables already attached to the ECU. Guess the next step just simple etacs coding and install cruise control switch, in my case replace my basic steering wheel with the leather steering with switches.