DIY Ultra Racing Front Lower Bar Installation
Finally installed the Ultra Racing Front Lower Bar for the Mirage.
Install time is 30-45 minutes.
What you need:
Ultra Racing Front Lower bar part # UR-LA4-2026
http://farm6.staticflickr.com/5502/1...e0399d4794.jpg
Tools needed:
- 2 Jacks / Jackstands
- Tire Wrench
- 1/2 Drive Socket Wrench
- 1/2 Drive 17mm Socket
- 1/2 Drive 19mm Socket
http://farm6.staticflickr.com/5500/1...fb9783228d.jpg
Optional Tool:
- 1/2 Drive Torque Wrench
http://farm4.staticflickr.com/3727/1...004ffe9120.jpg
1. Secure the car's rear tires, loosen the front wheel nuts and jack up the front wheels. Un-mount the front tires and secure it under just behind each jack stands.
http://farm6.staticflickr.com/5506/1...08e427de_z.jpg
2. Using a 17mm socket wrench loosen the front bolt of the left and right lower arms.
http://farm3.staticflickr.com/2821/1...5786cdd7_z.jpg
3. Using a 19mm socket wrench loosen the rear bolt that connects the left and right lower arms to the chassis.
http://farm3.staticflickr.com/2844/1...e3a45cc3fd.jpghttp://farm3.staticflickr.com/2873/1...0d6381e13b.jpg
4. Using a box as a support for the brace during installation, align the Ultra Racing lower brace to the front and rear bolts. Initially secure the bolts on all four points prior tightening.
http://farm6.staticflickr.com/5494/1...e58a45d686.jpg
5. Tighten the bolts on all four points. If you have a torque wrench, tighten it to 40 to 45N-m.
http://farm8.staticflickr.com/7338/1...2dab92481d.jpghttp://farm4.staticflickr.com/3701/1...833fbdd506.jpg
6. Remount the tires and nuts and enjoy the ride.
Final Pictures...
http://farm3.staticflickr.com/2870/1...ef3958d8f2.jpghttp://farm3.staticflickr.com/2878/1...11f5740c2a.jpg
http://farm3.staticflickr.com/2889/1...8482df8e88.jpg