Those are 160w bulbs. Stock is what, 55w or so? So about a 12a draw vs. 3.1 a draw? What gauge is the Mirage factory wiring?
Here's my concern. I recall somewhere during a engineering course that wiring shouldn't be used for more than 2x the normal rated current for chassis installation and even less current for power transmission.
The chart at the link shows 14ga limited to 32a for chassis wiring, just about 2x it's normal 15a rating.
I'm concerned there's too high a current draw on the standard headlight harness and it could melt in some hard to find hidden place, short out and blow fuses, or worst case, ignite the wiring or something around it and start a car fire.
I know there's no reports of it yet (are there?) but I'd still be super cautious installing LEDs.
https://www.powerstream.com/Wire_Size.htm