https://mirageforum.com/forum/showth...l=1#post126424
hERE IS MY POST # 49
I have the factory head unit and these rockford speakers in all doors.
The rockford/mitsu kit comes with a 5 channel amp that tees into the factory wiring harness.
I actually used the fast rings not baffles- I had forgotten. similiar means to the same end
Install is done.
I started with RF door speakers:
https://rockfordfosgate.com/products/details/r165x3/
They have a 91dB sensitivity rating. I used the scosche adapter rings and wiring adapters I found here on other posts.
I also installed Road Kill fast rings for improved midrange response. Had to modify due to the door brace right behind the speaker.
Just changing the door speakers made the system better and louder with the OE headunit.
After installing the Mitsu/RF system it definitely sounds good. Maybe not competition worthy but definitely like an OE premium stereo kit should sound.
Biggest issue I had was getting the bezel from around the head unit out. I made a very minor scuff on the dash. I should have used masking tape for protection at the trim tool fulcrum. Also when I did get the bezel out I damaged the edge of the head unit in a few spots where the bezel retainers mate to it.
If anyone needs the adapter for the thumb drive to the amp, I have two now. $5.00 shipped