The original factory filter on the 2014 Mirage is part # 1230A105 (no anti-drainback valve??)
The filter specified by the Mitsu dealer is part # MZ690072 (the "small filter" generally used on 3/4-cyls), and MZ690116 (40um nominal, 13psi bypass, 109 sq in cellulose media surface, silicone ADBV ... the "large filter", generally used on 6-cyls) - both apparently fit the Mirage.
Filters in order of Most-preferred to least-preferred (personal preference):
Wix: 51356 -
full Wix warranty (better flow rate) - 95% @ 20 microns, 50% @ 6 microns
NAPA Gold:
FIL 1356 -
looks like Wix warranties this - 95% @ 20 microns, 50% @ 6 microns
Mobil1: M1-110 -
Warranty - full synthetic, expensive, intended for extended drain
NAPA Silver:
SFL 31356 -
looks like Wix warranties this, nitrile ADBV, ~80% @ 20 microns - higher bypass psi than Proselect - Made in USA
O'Reilly's MicroGard MGL51356 -
comes with O'Reilly's standard 1yr warranty, nitrile ADBV, made in Mexico
NAPA Proselect SFI 21356 -
looks like Wix warranties this, nitrile ADBV
Donaldson:
P502007 -
Warranty - 50% @ 20 microns, Made in Indonesia
Baldwin: B1402 -
Baldwin's warranty - "99+% @ 45 microns and 50% @ 23 microns" (HC), nitrile ADBV?, made in USA
Hastings: -
LF240 -
Hasting's warranty - Same as Baldwin (HC), nitrile ADBV?
Fram: TG7317 ToughGuard or XG7317 Ultra Synthetic -
unknown warranty details (slowest flow rate?)
K&N:
PS-1010 or
HP-1010,
K&N Warranty, nitrile ADBVs, unknown filter efficiency ratings.
Best Filter?
... for Initial Break-In Period -
Wix 51356 or NAPA Gold
... After Break-In, For 3-6mo OCIs for Warranty -
NAPA Silver
... for Extended OCIs after Warranty Ends -
Amsoil:
Absolute Efficiency Oil Filter (EA15K13) -
Amsoil warranty - 98.7% @ 20 microns ... or the
Microgreen MG101-7 -
MG Warranty - Stage 1 Filter: 99% @ 20 microns. Stage 2: 99% @ 5 micron - Made in Mexico
Personally Avoiding:
Amsoil specs 26-32 ft lb torque for the oil plug
Oil filter wrench size is 65-67mm/14 (for the standard MZ690072 or 1230A105 filters), otherwise use 80-82mm? for the MZ690116
Oil filter torque: 12-20Nm? = 9-15 ft-lb?
Oil Viscosity Thread