Fog Lights? (Installing fog lights on existing factory wiring?)

[debburyl]

I would like a set on mine. But I don't have the fog light switch I'll have to save up to put those on mine done.

[tlstreak]

I know on the X you have to take off the bumper in order to remove the headlights. At quick glance it looks to be the same on the mirage. I didn't try it though. I had no problem going in from underneath. I just removed half the liner and pushed the rest back. Like posted above, if you try it and it works let us know.

i was reading the horn swap thread and got to looking down where the fogs go. i could do the drivers probably with removing anything. passenger side has the washer fluid and a little less room to work witb.

[Mistah JT]

I know on the X you have to take off the bumper in order to remove the headlights. At quick glance it looks to be the same on the mirage. I didn't try it though. I had no problem going in from underneath. I just removed half the liner and pushed the rest back. Like posted above, if you try it and it works let us know.

[MemphiS]

i was reading the horn swap thread and got to looking down where the fogs go. i could do the drivers probably with removing anything. passenger side has the washer fluid and a little less room to work witb.

Now that I think about it... I was about to attempt the same, but after seeing the washer fluid I decided to go in from underneath.

[Marklovski]

I would like a set on mine. But I don't have the fog light switch I'll have to save up to put those on mine done.

Yeah I didn't have them either. I had to drill a hole above where the main wires were.

I bought some aftermarket Blinglights fog lights for $100. They have blue accent lights, pretty cool.

Now that I think about it... I was about to attempt the same, but after seeing the washer fluid I decided to go in from underneath.

Going in from underneath is probably your best bet, well thats what I did. Just get someone to hold the fogs in place and you'll be good.

[tlstreak]

i pulled one of my headlight this morning. 10mm socket and a long ext. took about 2 minutes.

[MemphiS]

I would like a set on mine. But I don't have the fog light switch I'll have to save up to put those on mine done.

The kit comes with a switch. So that's not a problem. For example...

http://www.ebay.com/itm/2014-2015-Mi...75c383&vxp=mtr

i pulled one of my headlight this morning. 10mm socket and a long ext. took about 2 minutes.

Awesome. Good to know. Keep us updated and post some pics!

[debburyl]

Thanks,,,MemphiS,,, on the lights. I might try that. Or see how cheep it would be to have the dealer install them. They charge no Tax

[MemphiS]

Found a vid (different seller)...

[tlstreak]

ill be doing this here in the next few weeks. ill make the wife come out for a step by step diy since i have to do both.