Speedlab's supercharged Mirage 1.2L

[Donggie]

I haven't read through the whole thread here. But, has it been stated if this will work with North American models with MAF's?

If so when is it available, and when can I buy?

Yes it will work. Confirmed by another member that it will be the Unichip that will dictate compatibility to the North American Models with MAF's. It is currently available and the prices as well as paypal information has been provided early on in the thread. I'll try to look for it for you and then send you a link.

[Donggie]

Speedlab Supercharger System Packages and Pricing for Mitsubishi Mirage 1.2L 3cylinder - Confirmed 100% compatible with all models including North American version which has the MAF sensor.

Paypal Payments through: wac932@yahoo.com

Click to download pricing.

Attachment 1967

Hope this shows up correctly for any who are interested.

[ahintofpepperjack]

Hope this shows up correctly for any who are interested.

Thanks, is that an additional $450 in shipping costs on top of the $4,000?

[Donggie]

Thanks, is that an additional $450 in shipping costs on top of the $4,000?

yes, for DHL. EMS is cheaper

[TheTransporter]

Like i stated

It will work. But the wiring will be completely custom. It was explained to me that it has to be wired in to the proper sensors cutting up your harness.

Maybe with some searching u can find a male end to go to the female plug on the harness then run it to the tuner. Then run it back with the same female plug back to the sensor?

That would be the cleanest way i would think?

[hank]

Like i stated

It will work. But the wiring will be completely custom. It was explained to me that it has to be wired in to the proper sensors cutting up your harness.

Maybe with some searching u can find a male end to go to the female plug on the harness then run it to the tuner. Then run it back with the same female plug back to the sensor?

That would be the cleanest way i would think?

It's the same thing as splicing into the harness because you need to cut the harness and crimp pins to attach connectors. In addition, for a piggyback, the wiring is fairly simplistic, no harder than a simple aftermarket stereo install. I do agree though, installing connectors will provide a more seamless finish.

[TheTransporter]

That and it can be returned to stock easily and without damage

[Donggie]

Intercooled Configuration -TMIC

[91cavgt]

Hmmm..... Interesting. Is there any kind of hood scoop on the car to direct air to the intercooler? Or perhaps in the future swap it out to a water-air intercooler.

[Donggie]

Hmmm..... Interesting. Is there any kind of hood scoop on the car to direct air to the intercooler? Or perhaps in the future swap it out to a water-air intercooler.

Yep. It was designed a couple days ago and is currently being fabricated in Carbon Fiber.