Page 5 of 5 FirstFirst ... 345
Results 41 to 50 of 50

Thread: Manual tranny shift quality

  1. #41
    Junior Member bzacon's Avatar
    Join Date
    Apr 2017
    Location
    Milwaukee
    Country
    Vietnam
    Posts
    20
    Thanks
    36
    Thanked 6 Times in 3 Posts
    Reverse is absolutely terrible, I just got my '14 mirage and was unable to select reverse while the car was stopped in a near emergency. I put a cyclist in serious danger because I had pulled out into the bike lane to see around a corner, (lots of parked cars right up to the corner) and could not select reverse to back out and let him go in front of me, and he had to merge with heavy traffic. I was pulling it into reverse with BOTH HANDS and tried multiple times, even selecting another (not 5th) gear to make sure R wasn't locked out. I have only ever owned M/T cars and the degree to which Reverse doesn't work/isn't selectable in the Mirage is unacceptable for a car at ANY price.



  2. #42
    Senior Member
    Join Date
    May 2016
    Location
    Portland, Oregon
    Country
    United States
    Posts
    545
    Thanks
    288
    Thanked 272 Times in 166 Posts
    Have you adjusted it, or had it looked at?

  3. #43
    Senior Member
    Join Date
    Mar 2017
    Location
    Wisconsin
    Country
    United States
    Posts
    225
    Thanks
    68
    Thanked 77 Times in 46 Posts
    Sounds like it was abused by previous owner. Probably a hack at driving a manual transmission.

  4. #44
    Junior Member bzacon's Avatar
    Join Date
    Apr 2017
    Location
    Milwaukee
    Country
    Vietnam
    Posts
    20
    Thanks
    36
    Thanked 6 Times in 3 Posts
    Should be fine as far as adjustment, as the clutch engagement is stock-high, previous owner was hard on the car, lots of scratches inside and out and even some cigarette burns on interior which smells strongly of smoke, but wouldn't think that could have resulted from only 26,000mi

  5. #45
    Junior Member
    Join Date
    Jan 2017
    Location
    NH
    Country
    United States
    Posts
    5
    Garage empty: add car
    Thanks
    0
    Thanked 0 Times in 0 Posts
    The car needs to be on for the synchronizers to function properly. Drive and you'll see.

  6. #46
    Member ISP_guy's Avatar
    Join Date
    Feb 2016
    Location
    Erie, PA
    Country
    United States
    Posts
    83
    Thanks
    53
    Thanked 35 Times in 20 Posts
    I've had the car not want to go into reverse quite a few times. It seems like sometimes I have to "rock" the car forward and then shift in to reverse, like the gears are not quite aligned right the way I am sitting. I got into the habit of shifting to 1-2 then R when backing out of a parking spot or something. It's worked 99% fine that way... getting out of a spot at least.

    But you are right - when in a pinch and the need to hop into reverse in a quick fashion is needed, sometimes not being able to bump into R is a real hazard. I had a semi rounding a corner at an intersection and needed me to back up some to let him through... well the dang car didn't want to go into R. I had to move forward just a hair then bump into R, but he had to wait those extra few seconds for me to figure my crap out
    Last edited by ISP_guy; 04-28-2017 at 12:14 PM.

  7. #47
    Senior Member
    Join Date
    Mar 2017
    Location
    Wisconsin
    Country
    United States
    Posts
    225
    Thanks
    68
    Thanked 77 Times in 46 Posts
    Quote Originally Posted by ISP_guy View Post
    I've had the car not want to go into reverse quite a few times. It seems like sometimes I have to "rock" the car forward and then shift in to reverse, like the gears are not quite aligned right the way I am sitting. I got into the habit of shifting to 1-2 then R when backing out of a parking spot or something. It's worked 99% fine that way... getting out of a spot at least.

    But you are right - when in a pinch and the need to hop into reverse in a quick fashion is needed, sometimes not being able to bump into R is a real hazard. I had a semi rounding a corner at an intersection and needed me to back up some to let him through... well the dang car didn't want to go into R. I had to move forward just a hair then bump into R, but he had to wait those extra few seconds for me to figure my crap out
    This is common on any car I've driven with a standard. And I've owned a bunch. If it doesn't slide into reverse just move forward a hair and it will hit reverse easy. Takes literally a sec.

  8. The Following User Says Thank You to Pryme For This Useful Post:

    Eggman (04-28-2017)

  9. #48
    Member ISP_guy's Avatar
    Join Date
    Feb 2016
    Location
    Erie, PA
    Country
    United States
    Posts
    83
    Thanks
    53
    Thanked 35 Times in 20 Posts
    Quote Originally Posted by Pryme View Post
    This is common on any car I've driven with a standard. And I've owned a bunch. If it doesn't slide into reverse just move forward a hair and it will hit reverse easy. Takes literally a sec.
    This is my first manual car so it kind of threw me off the first few times I drove it. Getting the habit down now

  10. #49
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Ohio ☼
    Country
    United States
    Posts
    2,834
    Thanks
    1,928
    Thanked 672 Times in 500 Posts
    2nd then reverse for me, if needed.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 48.9 mpg (US) ... 20.8 km/L ... 4.8 L/100 km ... 58.7 mpg (Imp)


  11. #50
    Senior Member
    Join Date
    May 2014
    Location
    Country is Europe, state is Germany
    Country
    Germany
    Posts
    299
    Thanks
    37
    Thanked 192 Times in 107 Posts
    Usually getting it into reverse is totally problem-free with the engine running.

    If at a rare occaision reverse doesn't want to go in, just put it in neutral and let the clutch go, then swiftly press the clutch again and simultaneously put it in reverse.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •