Results 1 to 10 of 35

Thread: How to reset maintenance reminder and/or change service interval.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Dec 2015
    Country
    United States
    Posts
    360
    Thanks
    194
    Thanked 139 Times in 84 Posts

    Lightbulb How to reset maintenance reminder and/or change service interval.

    I found this on another Mitsubishi forum and wanted to pass it along. It is instructions on how to reset the maintenance reminder (look like a little wrench on the LCD display). Here is an example picture:



    I can confirm that it works for the North American Mirage 1.2 liter manual. I experimented with and can confirm that the ''OFF Display'' setting works as described below. I cannot confirm if the NAS codes work or are displayed as described below but I imagine they would at least be similar enough to figure out.


    Taken from:

    http://www.evolutionm.net/forums/09-ralliart-how-installations/450643-how-reset-mileage-counter-service-inspection.html

    Some useful info from the service manual - here is how to reset your Service Reminder, Change the Maintenance Schedule (factory default is 6 months/7,500 miles but those of us requiring the "Severe Maintenance" schedule can change it as outlined below), or inactivate it altogether:

    HOW TO CANCEL THE SERVICE REMINDER WARNING

    1. Turn the ignition switch to the "OFF" position.
    2. By operating the meter information switch, the warning period is displayed on the multi information display.
    3. Press the meter information switch once for 1.2 seconds or longer.
    4. The service reminder indicator flashes.
    5. While the service reminder indicator flashes, press the meter information switch once for less than 1.2 seconds.
    6. The service reminder indicator is turned ON, and "CLEAR" is displayed on the multi-information display for 3 seconds.
    7. After "CLEAR" is displayed for 3 seconds, the warning period to the next time is displayed.

    HOW TO SET THE SCHEDULE
    1. Turn the ignition switch to the "OFF" position.
    2. By operating the meter information switch, the warning period is displayed on the multi information display.
    3. Press the meter information switch once for 1.2 seconds or longer.
    4. The service reminder indicator flashes.
    5. While the service reminder indicator flashes, press the meter information switch 3 times consecutively for 1.2 seconds or longer (per press).
    6. The service reminder indicator is turned ON, (may display NOR) and the current schedule is displayed on the multi information display.
    7. While the current schedule is displayed, press the meter information switch 3 times consecutively for less than 1.2 seconds.
    8. The multi information display is shifted to the schedule selection mode.
    9. When the meter information switch is pressed for less than 1.2 seconds, the schedule is shifted, and when the switch is pressed for 1.2 seconds or longer, the displayed schedule is set.
    10. The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.

    ScheduleWarning types Warning criteria
    NAS 10 (initial setting) Elapsed time (month) Every 6 elapsed months
    Driving distance (miles) Every 7,500 miles of driving distance
    Driving distance (km) Every 12,000 km of driving distance

    NAS 11 Elapsed time (month) Every 3 elapsed months
    Driving distance (miles)Every 3,750 miles of driving distance
    Driving distance (km) Every 6,000 km of driving distance

    NAS 20 Elapsed time (month) Every 5 elapsed months
    Driving distance (miles) Every 5,000 miles of driving distance
    Driving distance (km) Every 8,000 km of driving distance

    NAS 21 Elapsed time (month) Every 4 elapsed months
    Driving distance (miles) Every 3,750 miles of driving distance
    Driving distance (km) Every 6,000 km of driving distance

    HOW TO INACTIVATE THE SERVICE REMINDER
    FUNCTION

    By setting to "OFF Display" or "Function OFF" when the schedule is set, the service reminder function can be inactivated.

    When "OFF" is selected
    _ Even when the check warning period is reached, the service reminder display is not displayed.
    _ Even if the service reminder screen is displayed by the meter information switch
    operation, "OFF" is displayed.
    .


    Hope this helps.
    Last edited by gone.a; 01-07-2016 at 02:35 AM.

  2. The Following 12 Users Say Thank You to gone.a For This Useful Post:

    + Show/Hide list of the thanked

    Cobrajet (01-06-2016),cyclopathic (01-06-2016),CYY (01-12-2019),daleWV (01-10-2017),Daox (01-08-2018),Eggman (01-06-2016),inuvik (01-06-2016),mohammad (05-07-2023),R01k (01-06-2016),Sprinter (05-11-2018),ThunderG (01-06-2016),yujinius (01-24-2019)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •