ECU fuel map recall

[deleted user]

I wish they could upgrade my mpg reading to refresh every 10-15 seconds instead of 30. I immediately climb my 10% grade driveway but i have seen over 40mpg in .3 mile (.5km). That difference in cold fuel trim won't make any real significant difference for me with the block heater.

regards
mech

[uheym]

Not sure what brand he has but here is the link to scangauges home page.

http://www.scangauge.com

Cleartec

I have a Scangauge2 bought on dba.dk..
I could show you how i works as we live close to eachother?

And right now there is actually one for sale http://www.dba.dk/andet-biltilbehoer...id-1022309490/ 830 kr is about 114 dollars..

I bought mine used for 300 kr, about 40 dollar

[Cleartec]

Cleartec

I have a Scangauge2 bought on dba.dk..
I could show you how i works as we live close to eachother?

And right now there is actually one for sale http://www.dba.dk/andet-biltilbehoer...id-1022309490/ 830 kr is about 114 dollars..

I bought mine used for 300 kr, about 40 dollar

Thanks for the link though uheym .

About the meeting, IF someday we were to be at the same spot it would be abolutely no problem for me . I might think we live about 20-30 km from each other .

I will take a look at the link to find a cheaper one, as I saw that in Biltema an OBDll was about 800 kr. I felt like it was to much, but 300kr damn that's a good deal

[uheym]

No problem.

Jep, the distance is no problem, or lets meet outside when the weahter is better

Whose Biltema has are not ment as a device you mount in the car, only for reading DTC codes (Diagnostic Trouble Codes) i haven't tested those so i can only tell from what i can read one the page..

Danish Site .. http://www.biltema.dk/da/Sog/?query=odb2
A few other sites have similar thing to, (but i like to have a real device from a well know manufacturer on this point, and no cheap china stuff.. as i don't wan't to buy a new ECU ..... )

https://www.thansen.dk/soeg/?q=mobilscan
http://www.aliexpress.com/wholesale?...=n&groupsort=1

[Cleartec]

No problem.

Jep, the distance is no problem, or lets meet outside when the weahter is better

Whose Biltema has are not ment as a device you mount in the car, only for reading DTC codes (Diagnostic Trouble Codes) i haven't tested those so i can only tell from what i can read one the page..

Danish Site .. http://www.biltema.dk/da/Sog/?query=odb2
A few other sites have similar thing to, (but i like to have a real device from a well know manufacturer on this point, and no cheap china stuff.. as i don't wan't to buy a new ECU ..... )

https://www.thansen.dk/soeg/?q=mobilscan
http://www.aliexpress.com/wholesale?...=n&groupsort=1

Jep indeed, better weather first

I was wrong then but thanks for the help anyways

Do you think the android versions are good from thansen?

[uheym]

I really don't know.
I don't like the idea to have my phone out of my pocket each time i wanna see something, even i have a gps/phone mount, but i usually only use it when traveling to a place i don't know well and wanna use the gps function.
I like it that it's attached to the car and "lives" there

The thansen model looks okay at youtube, but im more into the Scangauge ..

https://www.youtube.com/watch?v=9VtOs17Iltg

[Cleartec]

I really don't know.
I don't like the idea to have my phone out of my pocket each time i wanna see something, even i have a gps/phone mount, but i usually only use it when traveling to a place i don't know well and wanna use the gps function.
I like it that it's attached to the car and "lives" there

The thansen model looks okay at youtube, but im more into the Scangauge ..

https://www.youtube.com/watch?v=9VtOs17Iltg

Thanks for reply, but the scanguage do you have a problem with the cord, how do you install it?

[Cleartec]

Cleartec

I have a Scangauge2 bought on dba.dk..
I could show you how i works as we live close to eachother?

And right now there is actually one for sale http://www.dba.dk/andet-biltilbehoer...id-1022309490/ 830 kr is about 114 dollars..

I bought mine used for 300 kr, about 40 dollar

plz uheym tell me what does your scanguage say when the mirage is idling(L per hour)?

or really someone that can tell me this?

[Cleartec]

So I took mine to the dealership to have all three recalls addressed (faulty airbag sensors, waterproofing the wiring harness, and reflashing the ECU), and the UltraGauge does show a difference with the new ECU tune. Before, startup fuel flow would be around 0.35 Gal/Hr, but now it's dropped down to .28-.31 on startup. They actually had all three jobs done in an hour, which was pretty surprising. I had planned on camping out for a few hours.

Seeing the possibility of engine damage in the service mailer got my attention. I had figured it was running the mix too rich and washing the oil from the rings, but thankfully mine doesn't seem to be harmed by it.

isn't your gph to high for a 1.2 L engine, have you set up the scan guage to 1.2 L?

[deleted user]

Cold engines need a lot more fuel than warm engines, and cold idle is twice as high as warm.

regards
mech