Page 1 of 9 123 ... LastLast
Results 1 to 10 of 83

Thread: I was able to Enable OEM Cruise control of my 2014 Mirage DE 5-speed Manual.

Hybrid View

  1. #1
    Junior Member
    Join Date
    Apr 2016
    Location
    USA
    Country
    United States
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts

    I was able to Enable OEM Cruise control of my 2014 Mirage DE 5-speed Manual.

    It is possible to enable OEM cruise control for Mitsubishi Mirage base model years 2014,15,16.
    All you need is:
    1. used steering wheel from 2014 Outlander Sport and modify Cruise Control Switch Resistors or modify your steering wheel and buy Cruise Control Switch for Mirage ES.
    2. Buy Brake stop switch with 4 pins. Switches with 2 pins don't work (before buying check yours if yours have 4 pins). If manual transmission buy Clutch switch for Cruise control as well.
    3. Decode your ECU. In order to decode you need a Decoder and MUTII.
    That is all what you need to enable Cruise control.

  2. The Following 9 Users Say Thank You to seanla04 For This Useful Post:

    bzacon (04-21-2017),cyclopathic (04-10-2016),Daox (04-11-2016),Donut (04-10-2016),Eggman (08-10-2016),MetroMPG (04-10-2016),mitsumi (04-10-2016),spork (05-18-2016),strawboss (04-10-2016)

  3. #2
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Ohio ☼
    Country
    United States
    Posts
    2,514
    Thanks
    1,757
    Thanked 596 Times in 440 Posts
    Great post. The more detail you could provide, the better. For example, resistor values (before & after) and placement. I know it's probably too late to get photos of these details, but it would be very helpful for anyone else wanting to pursue this. ECU specifics, switch part numbers, identification of wiring harnesses (such as wire colors) and connector descriptions would all be helpful.

    Congratulations, and thanks for sharing.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 48.7 mpg (US) ... 20.7 km/L ... 4.8 L/100 km ... 58.5 mpg (Imp)


  4. #3
    Junior Member
    Join Date
    Apr 2016
    Location
    USA
    Country
    United States
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts
    I am working on my video, soon I'll post it. Here are the Wiring Diagrams
    Name:  CC.jpg
Views: 1865
Size:  98.5 KBName:  CC1.jpg
Views: 1851
Size:  95.4 KBName:  CC2.jpg
Views: 1938
Size:  89.1 KBName:  CC3.jpg
Views: 1846
Size:  87.5 KBName:  CC4.jpg
Views: 1853
Size:  92.6 KB
    Last edited by seanla04; 04-10-2016 at 02:33 AM.

  5. The Following 2 Users Say Thank You to seanla04 For This Useful Post:

    Eggman (04-10-2016),MetroMPG (04-10-2016)

  6. #4
    Junior Member
    Join Date
    Apr 2016
    Location
    USA
    Country
    United States
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts
    I apologize in advance. My video is not perfect. It is for demonstration purpose only. Here is a link to it:



    https://youtu.be/ftCZZLpCU-A
    https://youtu.be/ftCZZLpCU-A
    Last edited by MetroMPG; 04-10-2016 at 01:01 PM. Reason: (fixed video link)

  7. The Following 6 Users Say Thank You to seanla04 For This Useful Post:

    anog (05-17-2016),Daox (04-11-2016),Eggman (04-10-2016),MetroMPG (04-10-2016),Mossy1 (04-10-2016),strawboss (10-02-2016)

  8. #5
    Junior Member
    Join Date
    Apr 2016
    Location
    USA
    Country
    United States
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts
    I am working on the video and diagrams and some pics as well. As you say I can't open everything and show it in details.

  9. The Following 2 Users Say Thank You to seanla04 For This Useful Post:

    cyclopathic (04-10-2016),Eggman (04-10-2016)

  10. #6
    Junior Member
    Join Date
    Apr 2016
    Location
    USA
    Country
    United States
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts
    Name:  2014-mitsubishi-mirage_ES.jpg
Views: 1885
Size:  75.3 KBName:  20160409_160238.jpg
Views: 1859
Size:  93.6 KBName:  20160409_160911.jpg
Views: 1856
Size:  95.6 KB[attach]Name:  20160409_160205.jpg
Views: 1875
Size:  98.1 KB
    Attached Images Attached Images  
    Last edited by seanla04; 04-10-2016 at 02:00 AM.

  11. The Following 4 Users Say Thank You to seanla04 For This Useful Post:

    Daox (04-11-2016),Donut (04-10-2016),Eggman (04-10-2016),MetroMPG (04-10-2016)

  12. #7
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Ohio ☼
    Country
    United States
    Posts
    2,514
    Thanks
    1,757
    Thanked 596 Times in 440 Posts
    seanla04, much thanks for these details.

    Do you recall what value resistors you used on the cruise control? I didn't see them listed.

    I like the cruise control on my ES, and it was a primary reason for getting that trim level. Here for a few bucks, you have it on a DE.

    Bravo!

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 48.7 mpg (US) ... 20.7 km/L ... 4.8 L/100 km ... 58.5 mpg (Imp)


  13. The Following User Says Thank You to Eggman For This Useful Post:

    inuvik (04-10-2016)

  14. #8
    Junior Member
    Join Date
    Apr 2016
    Location
    USA
    Country
    United States
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts
    I posted the wiring diagram and it tells you how much resistance you should have. I bought 4 resistors from digitec.com company believe that each of them cost me about 50 cent. 1. 178 ohms 2. 287 ohms 3. 576 Ohms 4. 1740 ohms. For your information I spend more than you think because I was taking risk and bought MUTIII, repair manual which I am sharing for free and coding program. Thanks.

  15. The Following 3 Users Say Thank You to seanla04 For This Useful Post:

    Eggman (04-10-2016),inuvik (04-10-2016),Mossy1 (04-10-2016)

  16. #9
    Junior Member
    Join Date
    Mar 2016
    Location
    PA
    Country
    United States
    Posts
    23
    Garage empty: add car
    Thanks
    12
    Thanked 19 Times in 8 Posts
    Quote Originally Posted by seanla04 View Post
    I posted the wiring diagram and it tells you how much resistance you should have. I bought 4 resistors from digitec.com company believe that each of them cost me about 50 cent. 1. 178 ohms 2. 287 ohms 3. 576 Ohms 4. 1740 ohms. For your information I spend more than you think because I was taking risk and bought MUTIII, repair manual which I am sharing for free and coding program. Thanks.
    Nice job with your write up! It's cool you went with the MUT III, however I believe some have had success using the ETACS decoder program (pay per use or per month) and the cheaper Toyota cable. I know it lists cruise as a changeable option as well as others(fog lights, etc). If you don't mind me asking can you recommend a site that sells MUT III?

  17. #10
    Junior Member
    Join Date
    Apr 2016
    Location
    USA
    Country
    United States
    Posts
    17
    Thanks
    0
    Thanked 34 Times in 9 Posts
    I bought it from Aliexpress.com. Had to buy expensive one with PCMCIA card slot for a stand alone mode without computer. After I received it Card slot didn't work at all. I had a dispute with seller and they refund me $35. Price came out close to the one without card reader. I didn't bother returning and wait for another 3 month. I recommend the cheap one without memory card reader. You will be able to reprogram or diagnose your car using laptop. MUTIII software works with Laptops with win2000, XP or Windows7. It doesn't support Windows Vista or new windows versions at all. I am disagree with you about Cruise Control it is not changeable. Fog lights is option you can enable but not Cruise Control. I had many researches before I started this project. You still need MUTII to pull Kon file from your car. No other devices can pull out that file from your car. In many Etacs decoder forums they ask for kon file. Without it there is no way. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •