Does anyone on here machine or can 3D print hub centric rings for me? For a fair price?
Does anyone on here machine or can 3D print hub centric rings for me? For a fair price?
Do you have an unusual wheel or something that you can't find them in a specific size? The inner diameter of 56.1mm should work fine.
I bought a set on eBay with an inner diameter of 55.1 mm (which is too small and I knew that when I bought them). I had them machined to a 55.85mm inner diameter which is pretty much a perfect fit for the hubs on these cars. That little escapade cost me $65 at the machine shop (not including the cost of the hub rings). I should have just bought a set of 56.1mm/73mm rings on eBay for $20 and been done with it! The machine shop told me next time I need something like that, that it's almost easier for them to machine the whole ring from scratch.
Be sure to check eBay...lots on there and they are generally cheap.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 52.2 mpg (US) ... 22.2 km/L ... 4.5 L/100 km ... 62.6 mpg (Imp)
These guys have oddball sizes: http://us.hubcentric-rings.com/
__________________________________________
View my fuel log 2014 Mirage DE 1.2 manual: 49.2 mpg (US) ... 20.9 km/L ... 4.8 L/100 km ... 59.1 mpg (Imp)