Page 4 of 4 FirstFirst ... 234
Results 31 to 38 of 38

Thread: 2017 Touch Screen Stereo --> 2015 Mirage?

  1. #31
    Senior Member
    Join Date
    Aug 2015
    Location
    South Florida
    Country
    United States
    Posts
    183
    Thanks
    0
    Thanked 48 Times in 35 Posts
    I will buy it off from you if you decide to give up. this radio is made by Hyundai and use Hyundai style plug



  2. #32
    Senior Member
    Join Date
    May 2016
    Location
    Portland, Oregon
    Country
    United States
    Posts
    548
    Thanks
    289
    Thanked 273 Times in 167 Posts
    Quote Originally Posted by etravian View Post
    which as I understand it is also shared by the Lancer and the Outlander in various trim packages.

    I don't think that's accurate though. All the research on their radios are different.

    Unfortunately, I think you're going to need to find a wrecked 17+ mirage and cut off the male connectors with enough wire behind to piggback onto the Metras 14 and 15 female connectors.

    I will see if I can locate some.

  3. #33
    Junior Member
    Join Date
    Mar 2017
    Location
    USA
    Country
    United States
    Posts
    6
    Garage empty: add car
    Thanks
    0
    Thanked 2 Times in 1 Post
    Quote Originally Posted by Alex1a1f View Post
    I don't think that's accurate though. All the research on their radios are different.

    Unfortunately, I think you're going to need to find a wrecked 17+ mirage and cut off the male connectors with enough wire behind to piggback onto the Metras 14 and 15 female connectors.

    I will see if I can locate some.

    Thank you for looking around for that! I also did a little more digging, thanks to the comment by wmo168 that this is a Hyundai-sourced unit - and after a little googling around, I can see that in fact the connectors on the back look exactly like the Hyundai ones.

    http://www.hemanual.org/avn_head_uni...tion-2062.html

    And that leads me here:

    http://www.metraonline.com/part/71-7304

    So that's the harness that will plug into the new unit, methinks!

    Aaaannd...

    http://www.metraonline.com/part/70-7005 appears to be the correct harness to plug into the car... but it only shows the one plug, likely just for the audio and power, whereas I have steering wheel controls and an extra plug to deal with.

    GETTING CLOSER!!!!

    Oh and one more thing: the Metra double-DIN faceplate, as at least one other person has mentioned, will NOT work with the OEM Nav radio without modification. The Mits nav head unit is decidedly bigger than the hole in the faceplate.
    Last edited by etravian; 03-19-2017 at 08:59 PM.

  4. #34
    Junior Member
    Join Date
    Mar 2017
    Location
    USA
    Country
    United States
    Posts
    6
    Garage empty: add car
    Thanks
    0
    Thanked 2 Times in 1 Post
    Quote Originally Posted by Alex1a1f View Post
    I don't think that's accurate though. All the research on their radios are different.

    Unfortunately, I think you're going to need to find a wrecked 17+ mirage and cut off the male connectors with enough wire behind to piggback onto the Metras 14 and 15 female connectors.

    I will see if I can locate some.
    MORE INFO! Darn, this is hard stuff to find!

    Per another thread on this site, I've confirmed that the trim panel that should fit my OEM nav radio is 8002B480XA. But the tough one to find has been the reverse adapter for the car harness to this Hyundai-sourced head unit. After slogging through parts sites, I've come up with 8755A118 as the part number for the reverse harness, to go from stock Mirage (2014+) to 2017 Hyundai-sourced OEM nav unit MZ360500EX.

    $162. Sigh.

  5. #35
    Senior Member
    Join Date
    Aug 2015
    Location
    South Florida
    Country
    United States
    Posts
    183
    Thanks
    0
    Thanked 48 Times in 35 Posts
    Quote Originally Posted by etravian View Post
    MORE INFO! Darn, this is hard stuff to find!

    Per another thread on this site, I've confirmed that the trim panel that should fit my OEM nav radio is 8002B480XA. But the tough one to find has been the reverse adapter for the car harness to this Hyundai-sourced head unit. After slogging through parts sites, I've come up with 8755A118 as the part number for the reverse harness, to go from stock Mirage (2014+) to 2017 Hyundai-sourced OEM nav unit MZ360500EX.

    $162. Sigh.
    The junkyard or the person who sold you the radio should have include it. I got a 2014 OEM Nav Facotry unit and I have the junkyard include the reverse adapter from Stock DE harness to the Stock OEM Nav (Clarion) unit. Otherwise I will have to get it from the dealer.

    Bascially all car comes with stock OE harness that plug to the stock OE radio. It just a extra harness that plug into the nav unit or display radio in this case. This way there is no need to rewrite or hunt for a adapter.

  6. #36
    Junior Member
    Join Date
    Mar 2017
    Location
    USA
    Country
    United States
    Posts
    6
    Garage empty: add car
    Thanks
    0
    Thanked 2 Times in 1 Post
    Quote Originally Posted by wmo168 View Post
    The junkyard or the person who sold you the radio should have include it. I got a 2014 OEM Nav Facotry unit and I have the junkyard include the reverse adapter from Stock DE harness to the Stock OEM Nav (Clarion) unit. Otherwise I will have to get it from the dealer.

    Bascially all car comes with stock OE harness that plug to the stock OE radio. It just a extra harness that plug into the nav unit or display radio in this case. This way there is no need to rewrite or hunt for a adapter.
    That's good to know - that I'm working from a level playing field. Unfortunately, there are not going to be any 2017 Mirages around. I've seen exactly one on the road in my area. Any chance you can confirm the correct part number?

  7. #37
    Senior Member
    Join Date
    Aug 2015
    Location
    South Florida
    Country
    United States
    Posts
    183
    Thanks
    0
    Thanked 48 Times in 35 Posts
    Any news on the reverse adapter? The junkyard who sold you the unit must have it,.. otherwise have to keep looking.

  8. #38
    Senior Member
    Join Date
    Aug 2015
    Location
    South Florida
    Country
    United States
    Posts
    183
    Thanks
    0
    Thanked 48 Times in 35 Posts

    Smile

    Quote Originally Posted by wmo168 View Post
    Any news on the reverse adapter? The junkyard who sold you the unit must have it,.. otherwise have to keep looking.
    I will start research on this and get back with you, it should be just plug and play if you have the harness....



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •