Hi all. I think this topic should be here. That soft developed for Mitsubishi GS-platform based vehicles, but, thanks to my Vietnam friends possible to support Mirage/Attrage etc. models (2012+). You're welcome!
PS. Some functions may be unsupported, but reading and writing ECUs coding work well.
MMCodingWriter is a free software for change hidden options (coding) and diagnostics Mitsubishi vehicles (Lancer X 2007 - present time)
No internet required. No limits for any operation.
Free equivalent of MUT-III (partially) and Etacs Decoder.
Support all vehicles, where present ETACS starting 8637A313 and furhter. (including some Peugeot/Citroen models)
Support all J2534-compatible adapters and true ELM327 (USB/Bluetooth) 1.5
Downloads and instructions can be found here: https://forum.kolyandex.su/
Abilities:
1. Read/write variant coding
2. Read/write custom coding
3. Read/write coding in Engine ECU .
4. SAS calibration / G-sensor calibration.
5. Read/erase DTCs.
6. Turn on/off seatbelt reminder on dash (not working on 8100B900 and later).
7. Read/adapt RLS.
8. Erase engine adapts.
9. Change VIN in ETACS and engine.
10. Read errors history with ODO at DTC.
11. Change service reminder
12. Read A/C system pressure
13. Change Immo PIN
14. Reset oil degradation (CVT)
To edit saved coding files use MUT Coding Mitsubishi tool. Link https://acvan.net/programs/mut_coding_mitsubishi.php
Vehicles:
Lancer X, Outlander 3, Outlander XL, L200 2016+, Pajero sport 2016+, ASX, Delica D5, Xpander, Citroen C-Crosser, Peugeot 4007, Mirage, Attrage
Adapters:
Toyota Mini-VCI
Scanmatik 2
OpenPort 2.0
Chipsoft J2534 lite
And other J2534-compatible
ELM327 Bluetooth 1.5
ELM327 USB 1.5
ELS27
Also we have facebook group https://www.facebook.com/groups/mmcodingwriter/about/
THIS SOFTWARE ARE FULL FREE. NO PAYMENTS REQUIRED. NO ANY LIMITATIONS