An aftermarket engine (fuel and ignition) controller.
An aftermarket engine (fuel and ignition) controller.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
www.ovtuned.com (contact us) I'm pretty sure he mentioned on the mazda3tuning group FB page he could tune the mirage ecu as I had asked about it.most pre 16 "new gen" mazdas have Mitsubishi ECU's (now using DEnso). I don't know of any other page the owner runs, aside form the "ovtuned" fb page, but this group is run by him and a lot of tuning talk goes on here. He's been known to give deal/fre tunes to new ecu dumps. I got a deal for being the first to dump him a ecu file from my engine when it was brand new to the market. https://www.facebook.com/groups/535363713253123/
Hey, how did things progress with this build? working on my own turbo build, slowly coming together, have a Mitsubishi TF035 journal bearing turbo to use and have already installed the FIC 6, making a simple steam pipe manifold like yours, made my own flange too.
be keen to hear how you progressed.
Welcome to the forum, moonchook87!
Are you documenting your build? Going to start a thread? You would have a lot of very interested Mirage owners following it.
cheers
Darin
__________________________________________
View my fuel log 2014 Mirage ES 1.2 manual: 62.4 mpg (US) ... 26.5 km/L ... 3.8 L/100 km ... 74.9 mpg (Imp)
Yeah will probably throw it up on here when it gets in full swing, got a steady flow of parts coming in, hoping to have turbo manifold, and oil feed and drain all sorted in the next few weeks, got a weld in bung for the sump (gonna time its install for my 75,000km oil change) and a bunch of AN fittings in the mail at the moment. I'm hoping to basically make my own bolt-on turbo kit because its my daily driver, hardest part at the moment is I have no garage to work out of so its a pain pulling bits off and on in the street but luckily I've got access to a welder and other workshop tools at work.
Daox (10-30-2017)
We'd very much like to follow along with your build.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
Anyone building a turbo mirage?? Im newbie here ^^
There are several owners who have installed turbos on their Mirages. However, they haven't provided a ton of info on how they've gone about it.
Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block
Current project: DIY Nitrous oxide setup for ~$100
__________________________________________
View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)
its kinda hard to post some photo here. But i would like to share some of mine. Im using stock engine just normal bot on turbo running 10psi boost with stock ecu and piston conrod for around 10 month with no issue or problem at all.
Daox (06-28-2018)
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)