Page 1 of 10 123 ... LastLast
Results 1 to 10 of 95

Thread: Replacement Struts and Shocks

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Administrator Daox's Avatar
    Join Date
    Jan 2013
    Location
    Germantown, WI
    Country
    United States
    Posts
    4,999
    Thanks
    2,892
    Thanked 1,804 Times in 1,017 Posts
    Its been brought up a few times now that there are no aftermarket replacement struts and shocks available outside of the Mitsubishi dealer for the Mirage. So, today I sent a message to Monroe, KYB, Gabriel, Sachs, and OSC to see if they have any plans to make struts/shocks for the Mirage. They have all made suspension parts for other/older Mitsubishi's. If you guys can think of any other manufacturers who make such parts, I'd be happy to contact them.
    Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block

    Current project: DIY Nitrous oxide setup for ~$100

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)


  2. #2
    Where's the leak ma'am? Marklovski's Avatar
    Join Date
    Apr 2015
    Location
    Seattle
    Country
    United States
    Posts
    993
    Thanks
    457
    Thanked 273 Times in 209 Posts
    Quote Originally Posted by Daox View Post
    FYI, today I sent a message to Monroe, KYB, Gabriel, Sachs, and OSC to see if they have any plans to make struts/shocks for the Mirage. They have all made suspension parts for other/older Mitsubishi's. If you guys can think of any other manufacturers who make such parts, I'd be happy to contact them.
    How about Megan?
    Fuel Log: Good enough
    Instagram: @zoras_sapphire

  3. #3
    Senior Member
    Join Date
    Apr 2014
    Location
    PA
    Country
    United States
    Posts
    137
    Thanks
    66
    Thanked 26 Times in 16 Posts
    Quote Originally Posted by Daox View Post
    FYI, today I sent a message to Monroe, KYB, Gabriel, Sachs, and OSC to see if they have any plans to make struts/shocks for the Mirage. They have all made suspension parts for other/older Mitsubishi's. If you guys can think of any other manufacturers who make such parts, I'd be happy to contact them.
    Bilstein and Superlift.

  4. #4
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Cleveland, Ohio
    Country
    United States
    Posts
    10,231
    Thanks
    4,063
    Thanked 2,820 Times in 2,126 Posts
    Why Superlift? Don't they specialize in off-road suspensions?

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)


  5. #5
    Where's the leak ma'am? Marklovski's Avatar
    Join Date
    Apr 2015
    Location
    Seattle
    Country
    United States
    Posts
    993
    Thanks
    457
    Thanked 273 Times in 209 Posts
    Quote Originally Posted by Eggman View Post
    Why Superlift? Don't they specialize in off-road suspensions?
    I'd want it because I want to overland.
    Fuel Log: Good enough
    Instagram: @zoras_sapphire

  6. #6
    Administrator Daox's Avatar
    Join Date
    Jan 2013
    Location
    Germantown, WI
    Country
    United States
    Posts
    4,999
    Thanks
    2,892
    Thanked 1,804 Times in 1,017 Posts
    Gabriel got back to me this morning:

    Good morning Tim,
    As of today we don’t offer any products for any Mitsubishi as of yet.
    No time frame is known at this time.
    Regards,

    GABRIEL RIDE CONTROL LLC
    Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block

    Current project: DIY Nitrous oxide setup for ~$100

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)


  7. #7
    Administrator Daox's Avatar
    Join Date
    Jan 2013
    Location
    Germantown, WI
    Country
    United States
    Posts
    4,999
    Thanks
    2,892
    Thanked 1,804 Times in 1,017 Posts
    Monroe also got back to me this morning.

    Tim,

    Unfortunately, we do not have information on what or if any future plans are in the works for this vehicle application. However, I will make an internal note on our coverage reports to ensure our marketing and engineering team is aware of the demand in the market for units. We apologize for any frustration or inconvenience that this may have caused.

    Tenneco Technical Resource Center
    Monroe Shocks and Struts
    Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block

    Current project: DIY Nitrous oxide setup for ~$100

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)


  8. #8
    Administrator Daox's Avatar
    Join Date
    Jan 2013
    Location
    Germantown, WI
    Country
    United States
    Posts
    4,999
    Thanks
    2,892
    Thanked 1,804 Times in 1,017 Posts
    Okay, another issue... The Tokico Catalog OEM numbers do not fully agree with the US Mitsu part numbers.

    Tokico says the front struts are: 4060-A345 and 4060-A379
    Our own research shows the front struts are: 4060-A382 (2014 & 2015) and 4060-A494 (2017)

    Tokico says the rear shocks are: 4162-A199 and 4162-A219
    Our own research shows the rear shocks are: 4162-A219 (yay a match for 2014/2015) and 4162A396 (2017)

    I assume most of you would want to install the 2017 struts and shocks on yoru Mirages as it reduces body roll a little bit.
    Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block

    Current project: DIY Nitrous oxide setup for ~$100

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)


  9. #9
    Administrator Daox's Avatar
    Join Date
    Jan 2013
    Location
    Germantown, WI
    Country
    United States
    Posts
    4,999
    Thanks
    2,892
    Thanked 1,804 Times in 1,017 Posts
    A bit more reading here on our own forum shows that Tokico makes the OEM struts and shocks.

    http://mirageforum.com/forum/showthr...ll=1#post59102


    Quote Originally Posted by MightyMirageMpg View Post
    $200 for shocks does seem a bit steep....

    TOKICO (OEM strut/shock mfr) lists the shock @ strut to fit, "lancer/colt/mirage"

    http://www.tokico.biz/catalogue/index.html
    The part number on the front struts is: B1109
    The part number on the rear shocks is: E20041

    http://www.hitachi-automotive.co.jp/...catalogue2.pdf

    So, we just have to find a better distributor than dealers to get Tokico products from. There are quite a few and I'll be contacting them to see if they can get these. Unfortunately, Tokico US doesn't list these parts.... so it will be interesting to see if they can be acquired.
    Custom Mirage products: Cruise control kit, Glove box light, MAF sensor housing, Rear sway bar, Upper grill block

    Current project: DIY Nitrous oxide setup for ~$100

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage DE 1.2 manual: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)


  10. #10
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Cleveland, Ohio
    Country
    United States
    Posts
    10,231
    Thanks
    4,063
    Thanked 2,820 Times in 2,126 Posts
    Location Tokico Part # OEM Part # Descripton Bore Size Length Compressed Length Extended Notes
    Front strut B1109 4060-A345
    4060-A379
    Suspension Strut (Gas type) 1000~4000 Different OEM
    part numbers?
    Front strut Not listed 4060-A382 ? 2014 listing
    2015 listing
    Rear shocks E20040 4162-A199 Twin Tube Shock Absorber (Gas type) 1000~4000 13" tires
    Rear shocks E20041 4162-A219 Twin Tube Shock Absorber (Gas type) 1000~4000 14" tires
    2014 listing
    2015 listing
    References:
    Hitachi Automotive Application Listing that Daox posted
    The online parts catalog of Mitsubishi Parts Warehouse

    It sure would be helpful to get the lengths & bore size documented. I think that would help in selecting alternatives.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)


  11. The Following 2 Users Say Thank You to Eggman For This Useful Post:

    Daox (06-03-2017),Top_Fuel (06-03-2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •