Eggman (11-05-2017)
I recently installed OEM(Genuine) cruise control. Just leaving some information for Australian models.
Model: MY2016 ES CVT Hatchback
Clock spring: 5 pin only, need to replace or modify. Modification is a bit complex, you need good hands on skill. You also need cut flexi connector to fit in the housing. Recommend to get 8619A362.
Brake switch: 4 pin, no need to replace
Cruise control Indicator(Grenn LED): Populated. no need to add.
ETACS: just follow the instructions. Copy version of ELM327 Bluetooth is not working (can read but cannot write)
Steering Switch: Get the one with 178,287,576,1740 ohms. If the one you got has different resistors, just replace them.
If you have SMD resistor kit, very popular series of 180, 270,560,1.8K ohms work fine.
Tips: Mark the position before removing steering wheel. Use ETACS programmer with cable (not Bluetooth or wifi)
MMC Coding Writer is free and works perfectly thanks to the Author.
Good luck!
Last edited by noripyon; 12-30-2020 at 09:54 AM.