Page 3 of 7 FirstFirst 12345 ... LastLast
Results 21 to 30 of 65

Thread: 6th Gen Mirage: Tuner/Power Programmer/ECU/Piggyback. Where are we now?

  1. #21
    Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    44
    Thanks
    7
    Thanked 10 Times in 7 Posts
    And does this show the crankshaft to have 18 teeth then?

    Name:  GR00000300-ENGINE OVERHAUL_Page_34.jpg
Views: 47
Size:  89.5 KB



  2. #22
    Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    44
    Thanks
    7
    Thanked 10 Times in 7 Posts
    Progress so far:
    Bully Dog - no fitment. contacted via email, no response
    Hypertech - no fitment. contacted via email, no response
    Superchips - no fitment. contacted via email, no response
    DiabloSport - no fitment. contacted via facebook, no response
    Edge - no fitment. contacted via email, no response
    Greddy - no fitment. contacted via website, no response. Greddy has discontinued support for the Emanage line of ecus
    1kd Performance - ? fitment. contacted via website, no response
    Haltech - no fitment. contacted via email. was told to provide specific technical info/info sent/
    DIYAutoTune.com - no fitment. contacted via facebook. was told to provide specific technical info/info sent/
    Orangevirus Tuning (ecu reflash) contacted via facebook. ecu reflash in development
    Last edited by Qrush; 11-10-2017 at 11:05 AM.

  3. The Following 3 Users Say Thank You to Qrush For This Useful Post:

    ahausheer (11-10-2017),Daox (11-10-2017),Fummins (11-10-2017)

  4. #23
    Senior Member MightyMirageMpg's Avatar
    Join Date
    Apr 2016
    Location
    wi
    Country
    United States
    Posts
    611
    Thanks
    343
    Thanked 224 Times in 142 Posts
    No. That's the cam and crank drive sprockets. 18 @ 36 because the crank turns 2x the cam speed.

    The trigger wheels will look similar. I don't *know* they are hall effect, but that's how the fsm illustrates them. The link i linked earlier has the information necessary to determine definitively if they are hall effect or something else.

    Somewhere there's a picture of the 3a92 with the oil pan off and crank exposed, and you can see the starwheel location. I even asked what it was just to be sure in the thread. I'm 90% sure fummins posted it.


    Edit; diyautotune (aka megasquirt) is capable of running your lawnmower or a dodge viper. It'll for surely run the mirage. It's universal. They just do not have a plug n play version for the mirage.
    Last edited by MightyMirageMpg; 11-10-2017 at 02:28 PM.

  5. #24
    Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    44
    Thanks
    7
    Thanked 10 Times in 7 Posts
    Quote Originally Posted by MightyMirageMpg View Post
    No. That's the cam and crank drive sprockets. 18 @ 36 because the crank turns 2x the cam speed.

    The trigger wheels will look similar. I don't *know* they are hall effect, but that's how the fsm illustrates them. The link i linked earlier has the information necessary to determine definitively if they are hall effect or something else.

    Somewhere there's a picture of the 3a92 with the oil pan off and crank exposed, and you can see the starwheel location. I even asked what it was just to be sure in the thread. I'm 90% sure fummins posted it.


    Edit; diyautotune (aka megasquirt) is capable of running your lawnmower or a dodge viper. It'll for surely run the mirage. It's universal. They just do not have a plug n play version for the mirage.
    Well guess im going to have to locate the trigger/shutter wheels then

    Hall = shutter wheel with windows/VR = toothed wheel with 2 wires/Optical = LED with a sensor opposing a flat disk. Need to find out definitively

    I looked for Fummins post, no luck so far. Ill keep looking

    Unfortunately I gave them some likely incorrect information. Ill try to button down my next response. They were quick to respond before and theres appears to be a path, theres hope there. Good call on that.
    Last edited by Qrush; 11-10-2017 at 02:59 PM.

  6. #25
    Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    44
    Thanks
    7
    Thanked 10 Times in 7 Posts
    Is this the pic?

    Name:  crank wheel.jpg
Views: 44
Size:  90.9 KB

  7. #26
    Senior Member MightyMirageMpg's Avatar
    Join Date
    Apr 2016
    Location
    wi
    Country
    United States
    Posts
    611
    Thanks
    343
    Thanked 224 Times in 142 Posts
    Yep that's it

    I never noticed the bosses on the main caps. There must be a block girdle? She's already ready for big power

  8. #27
    Senior Member
    Join Date
    Oct 2016
    Location
    ab
    Country
    Canada
    Posts
    448
    Garage empty: add car
    Thanks
    122
    Thanked 270 Times in 152 Posts
    Rkt Ship replaced his engine, maybe he still has the old one laying around?

  9. #28
    Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    44
    Thanks
    7
    Thanked 10 Times in 7 Posts
    Quote Originally Posted by Fummins View Post
    Rkt Ship replaced his engine, maybe he still has the old one laying around?
    oooh...that could be helpful for research

  10. #29
    Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    44
    Thanks
    7
    Thanked 10 Times in 7 Posts
    Quote Originally Posted by MightyMirageMpg View Post
    Yep that's it

    I never noticed the bosses on the main caps. There must be a block girdle? She's already ready for big power
    yum .

    I showed haltech this pic thinking the larger diameter wheel inside the crank case was the crank trigger wheel. His response, "Yes, the larger wheel is the crank pickup. Knowing what tooth pattern that is along with the cam tooth pickup pattern is the first step. A custom parallel installation of a Haltech with the factory ecu like you are attempting is very challenging even for experienced installers and tuners. We do not recommend doing so unless you have an advanced understanding of the factory engine controls as well aftermarket engine control systems". so thats 1 trigger wheel. still need to count the teeth and get the pattern for this trigger. still need to get the cam trigger wheel
    Last edited by Qrush; 11-13-2017 at 04:00 PM.

  11. #30
    Member Qrush's Avatar
    Join Date
    Oct 2017
    Location
    Jacksonville, FL
    Country
    United States
    Posts
    44
    Thanks
    7
    Thanked 10 Times in 7 Posts
    Here is a diagram showing the "crankshaft sensing ring" (#15)


    Attached Images Attached Images   
    Last edited by Qrush; 11-11-2017 at 12:54 PM.

  12. The Following User Says Thank You to Qrush For This Useful Post:

    ahausheer (11-11-2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •