Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: DIY! Inexpensive Ramp

  1. #1
    Senior Member mitsumi's Avatar
    Join Date
    May 2015
    Location
    Manila
    Country
    Philippines
    Posts
    803
    Thanks
    478
    Thanked 286 Times in 174 Posts

    DIY! Inexpensive Ramp

    Hi guys... I think this can be helpful for others planning to a buy an expensive ramp like me. So i found a site and not sure if im allowed to share this here but will definitely build one for me

    Kindly delete if not allowed.

    Credits to the poster!

    Name:  SQ view.jpg
Views: 154
Size:  92.8 KB

    http://www.team-bhp.com/forum/diy-do...car-ramps.html


        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage GLS 1.2 manual: 26.3 mpg (US) ... 11.2 km/L ... 8.9 L/100 km ... 31.6 mpg (Imp)


  2. The Following 5 Users Say Thank You to mitsumi For This Useful Post:

    Alex1a1f (01-10-2018),Cobrajet (01-10-2018),Daox (01-10-2018),MetroMPG (01-13-2018),wellswebdesign (01-10-2018)

  3. #2
    Senior Member Cobrajet's Avatar
    Join Date
    May 2015
    Location
    Olympia, WA
    Country
    United States
    Posts
    1,427
    Thanks
    483
    Thanked 768 Times in 457 Posts
    Very cool!

  4. #3
    Senior Member
    Join Date
    Nov 2016
    Location
    Niagara region
    Country
    Canada
    Posts
    303
    Thanks
    12
    Thanked 84 Times in 65 Posts
    Just goes to show even something around forever can be improved upon.
    Zero, my 2014 ES Plus gone but not forgotten. We're driving the Beetle of the 21st century

        __________________________________________

        click to view fuel log View my fuel log 2017 Mirage ES PLus 1.2 manual: 39.0 mpg (US) ... 16.6 km/L ... 6.0 L/100 km ... 46.8 mpg (Imp)


  5. #4
    Senior Member Top_Fuel's Avatar
    Join Date
    Feb 2016
    Location
    Ohio
    Country
    United States
    Posts
    1,047
    Thanks
    548
    Thanked 758 Times in 383 Posts
    Here are some extreme wooden ramps. I remember seeing these 15+ years ago on a Mustang forum...

    Name:  cobra_ramp2.jpg
Views: 145
Size:  49.9 KB

    Name:  ramps.jpg
Views: 143
Size:  51.2 KB

    Source Link

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 51.2 mpg (US) ... 21.8 km/L ... 4.6 L/100 km ... 61.5 mpg (Imp)


  6. The Following 4 Users Say Thank You to Top_Fuel For This Useful Post:

    Alex1a1f (01-13-2018),brentle (02-01-2018),Daox (01-10-2018),mitsumi (01-11-2018)

  7. #5
    Senior Member
    Join Date
    Mar 2015
    Location
    Columbus, OH
    Country
    United States
    Posts
    273
    Thanks
    97
    Thanked 186 Times in 92 Posts
    Very nice! If it were me, I'd make the ramps a little longer, and for the piece to stop you from driving too far, I would put it on top and screw it down from the top, rather than into the back. The way that ramp is, your tire hitting the piece of wood screwed like that, could have some decent leverage and either break screws or rip them out of the back, causing you to over-drive the ramp.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 44.1 mpg (US) ... 18.7 km/L ... 5.3 L/100 km ... 52.9 mpg (Imp)


  8. The Following User Says Thank You to wellswebdesign For This Useful Post:

    MetroMPG (01-13-2018)

  9. #6
    Senior Member mitsumi's Avatar
    Join Date
    May 2015
    Location
    Manila
    Country
    Philippines
    Posts
    803
    Thanks
    478
    Thanked 286 Times in 174 Posts
    @wellswebdesign - yep, i thought of that as well. It seems that its not safe if you only screw a bit of that wood from the top. Instead, make it from the bottom to the top is much safer.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage GLS 1.2 manual: 26.3 mpg (US) ... 11.2 km/L ... 8.9 L/100 km ... 31.6 mpg (Imp)


  10. #7
    Senior Member Alex1a1f's Avatar
    Join Date
    May 2016
    Location
    Portland, Oregon
    Country
    United States
    Posts
    823
    Thanks
    535
    Thanked 443 Times in 252 Posts
    I made a couple ramps from a beam I removed from my house. I cut it into 4 lengths and screwed them together. They work well. 4' long x 11.25 " tall x 11 7/8" wide.
    Attached Images Attached Images   
    (blank signature)

  11. The Following 4 Users Say Thank You to Alex1a1f For This Useful Post:

    Eggman (01-13-2018),MetroMPG (01-13-2018),mitsumi (01-14-2018),Top_Fuel (01-13-2018)

  12. #8
    Moderator Eggman's Avatar
    Join Date
    Sep 2015
    Location
    Cleveland, Ohio ☼
    Country
    United States
    Posts
    4,054
    Thanks
    2,604
    Thanked 1,018 Times in 759 Posts
    Quote Originally Posted by Alex1a1f View Post
    I made a couple ramps from a beam I removed from my house. I cut it into 4 lengths and screwed them together. They work well. 4' long x 11.25 " tall x 11 7/8" wide.
    I like the racing stripe.
    Welcome to MirageForum.com
    Forums work best when information is shared.
    And don't forget pictures.
    Mitsubishi Is Not Dead Yet
    Hatchbacks. I like hatchbacks. Can't stop thinking about them.

        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 49.5 mpg (US) ... 21.0 km/L ... 4.8 L/100 km ... 59.4 mpg (Imp)


  13. The Following User Says Thank You to Eggman For This Useful Post:

    Alex1a1f (01-13-2018)

  14. #9
    Administrator MetroMPG's Avatar
    Join Date
    Jan 2013
    Location
    1000 Islands, Ontario
    Country
    Canada
    Posts
    6,452
    Thanks
    2,056
    Thanked 1,763 Times in 1,084 Posts
    Quote Originally Posted by wellswebdesign View Post
    I'd make the ramps a little longer, and for the piece to stop you from driving too far, I would put it on top and screw it down from the top, rather than into the back. The way that ramp is, your tire hitting the piece of wood screwed like that, could have some decent leverage and either break screws or rip them out of the back, causing you to over-drive the ramp.
    Agreed! Don't ask me how I know! (I didn't quite drive off the end.)

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage base ES 1.2 manual: 54.0 mpg (US) ... 23.0 km/L ... 4.4 L/100 km ... 64.9 mpg (Imp)


  15. The Following User Says Thank You to MetroMPG For This Useful Post:

    wellswebdesign (01-13-2018)

  16. #10
    Senior Member
    Join Date
    Mar 2015
    Location
    Columbus, OH
    Country
    United States
    Posts
    273
    Thanks
    97
    Thanked 186 Times in 92 Posts
    Quote Originally Posted by MetroMPG View Post
    Agreed! Don't ask me how I know! (I didn't quite drive off the end.)
    I've got Rhino ramps, and it's not hard to hit the end. I probably do it every time I go up on my ramps. There's so much resistance getting up the ramps that once you hit the level part, it's a split second from being level to being at the bump stop at the end of the ramp.


        __________________________________________

        click to view fuel log View my fuel log 2015 Mirage ES 1.2 manual: 44.1 mpg (US) ... 18.7 km/L ... 5.3 L/100 km ... 52.9 mpg (Imp)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •