Results 1 to 10 of 10

Thread: Need help on wiring to get through the firewall

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Apr 2017
    Location
    Malaysia
    Country
    Malaysia
    Posts
    37
    Thanks
    26
    Thanked 5 Times in 3 Posts

    Need help on wiring to get through the firewall

    Greetings,

    I got a custom headlight project going on. The headlight projector was included with a drl angel eyes and a demon eyes led. I want to make a separate independent switch for both of the angel drl and demon eyes bcos i want to be a bit of conservative on the fancy lights, and easier for me to get through roadblocks and stuff.

    My problem now is i dont have any idea where to run the wire from the engine compartment fusebox into the cabin. Mine was right hand drive version.

    I did notice there's 2 wiring harness that get thru the firewall behind the battery but it's very tight and i have no idea how to deal with that rubber gromet bcos it was very tight!
    Last edited by dgiarazza; 03-25-2018 at 10:13 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •