Results 1 to 7 of 7

Thread: mirage recalls on japansese website

  1. #1
    Senior Member
    Join Date
    Sep 2013
    Location
    Location :
    Country
    Netherlands
    Posts
    305
    Garage empty: add car
    Thanks
    5
    Thanked 19 Times in 14 Posts

    mirage recalls on japansese website

    brake recalls mirage on japanse website and some other recalls

    Index:
    http://www.mitsubishi-motors.co.jp/support/recall/

    Recall SC146:
    http://recall.mitsubishi-motors.co.jp/Recall/displayselect.do?orderno=SC146


    Brake of Mirage (for rear wheel speed sensor)

    Service campaign start date October 18, 2013

    Content of the problem Because the layout of the rear wheel speed sensor harness is incorrect, there is a case to impose the sensor harness snow mass deposited on the rear wheel house in the snow road running by fallen, is in contact with the tire. There is a possibility that the sensor harness disconnected when traveling in this state, ABS warning light, etc. with light, ABS function, etc. will not work.
    The contents of improvement I will replace the reduction products that are assembled rear wheel speed sensor harness to the rear brake hose all vehicles, the rear brake hose and rear wheel speed sensor.

    English Translate link: http://translate.google.com/translat...rderno%3DSC146
    Recall 13240:
    http://recall.mitsubishi-motors.co.j...?orderno=13240

    Brake of Mirage (for brake hydraulic unit)

    Recall notification number 3240 Recall notification day October 18, 2013 Recall start date October 18, 2013

    If it is based on non-conforming state
    structure it finds, or equipment
    The cause and circumstances of performance
    In rework of brake fluid filling, some for air venting operation of the brake line is inappropriate, air is remaining in the brake hydraulic unit. Therefore, brake pedal stroke is increased, in the worst case, there is a possibility that the effectiveness of the brakes is reduced. In addition, ASC is (anti-skid system) with the car, there is a possibility that the anti-skid function is impaired.
    Contents of the improvement measures Use as a replacement for all vehicle spare parts, the brake hydraulic unit.

    English transation link: http://translate.google.com/translat...rderno%3D13240
    Recall 13121:
    http://recall.mitsubishi-motors.co.j...?orderno=13121

    For brake and speedometer of Mirage


    Recall notification number 3121 Recall notification day March 15, 2013 Recall start date March 15, 2013

    If it is based on non-conforming state
    structure it finds, or equipment
    The cause and circumstances of performance
    Because in front wheel speed sensor, waterproof performance of the harness part is missing, you may water entering inside the sensor. May water is entering the sensor inside, abnormality occurs in the sensor output signal, lighting of the ABS warning light, etc., swing needle of the speedometer, vehicle shock due to malfunction or TCL noise glitch ABS occurs, In the worst case, it may cause the vehicle to cross flow during sudden braking from high speeds or lowering, of the braking force.
    TCL: traction control
    Contents of the improvement measures I Replace the reduction products all vehicles, the front wheel speed sensor.

    English translation link: http://translate.google.com/translat...rderno%3D13121
    Recall SC133:
    http://recall.mitsubishi-motors.co.j...?orderno=SC133

    The engine of the Mirage


    Service campaign start date March 15, 2013

    Content of the problem
    Idling stop in (AS & G *) For vehicles equipped with, for programs of the engine ECU is inappropriate, if you continue to stop at the brake force of the degree to stop the creep running of the vehicle to automatic stop after the engine, if you do not auto start after you release the brake pedal I have a. It should be noted that, due to restart operation of the ignition key or the operation of such release is depressed strongly brake is possible.
    For programs of the engine ECU is inappropriate, A / C compressor is activated in the state of direct connection is CVT during deceleration, may torque fluctuation of the engine is transmitted to the drive system, extrusion and feel shock occurs.
    * AS & G: Idling stop function according to AutoStop & Go stop start, to stop-start the engine automatically.
    The contents of improvement I will rewrite the program measures the program all vehicles, the engine ECU.

    English translation link: http://translate.google.com/translat...rderno%3DSC133
    use google translate!


    Last edited by spacester; 11-01-2013 at 01:21 PM.

  2. The Following 2 Users Say Thank You to spacester For This Useful Post:

    Daox (11-01-2013),MetroMPG (11-01-2013)

  3. #2
    Excellent find - thanks, spacester. (How did you find it??)

    ---

    I edited your post to add descriptions of each recall.

    On the original Japanese pages there are also good images showing the repairs and/or location of the problems.

    #13121 Is the same recall we've seen in other countries already (front wheel speed sensor wiring, insufficient weatherproofing) - Thread: Australian Recall - Mirages manufactured prior to 26th Jan 2013 (wheel speed sensors)

    #SC133 Appears to be an ECU code fix for Auto Stop 'n' Go cars, and also appears to be a refinement for cars with AC and CVT. (But remember in Japan there is only the 1.0L engine.)

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage ES 1.2 manual: 63.2 mpg (US) ... 26.9 km/L ... 3.7 L/100 km ... 75.9 mpg (Imp)


  4. The Following User Says Thank You to MetroMPG For This Useful Post:

    Daox (11-01-2013)

  5. #3
    Member
    Join Date
    Oct 2013
    Location
    Houston, TX
    Country
    United States
    Posts
    54
    Garage empty: add car
    Thanks
    0
    Thanked 1 Time in 1 Post
    Good job Metro, way to stay on it! So far no recalls in NA?

        __________________________________________

        click to view fuel log View my fuel log 2010 Yaris 1.5 manual: 36.9 mpg (US) ... 15.7 km/L ... 6.4 L/100 km ... 44.3 mpg (Imp)


  6. #4
    None that I've seen.

    You can search for recalls in the USA here:
    http://www-odi.nhtsa.dot.gov/owners/SearchVehicles

    And in Canada, here:
    http://wwwapps.tc.gc.ca/Saf-Sec-Sur/....aspx?lang=eng

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage ES 1.2 manual: 63.2 mpg (US) ... 26.9 km/L ... 3.7 L/100 km ... 75.9 mpg (Imp)


  7. #5
    Senior Member
    Join Date
    Sep 2013
    Location
    Location :
    Country
    Netherlands
    Posts
    305
    Garage empty: add car
    Thanks
    5
    Thanked 19 Times in 14 Posts
    wait a min... in japan they have the 1.0 liter with cvt???

  8. #6
    Yup. As far as I know, only the 1.0 is available in Japan.

    http://www.mitsubishi-motors.co.jp/mirage/performance/

        __________________________________________

        click to view fuel log View my fuel log 2014 Mirage ES 1.2 manual: 63.2 mpg (US) ... 26.9 km/L ... 3.7 L/100 km ... 75.9 mpg (Imp)


  9. #7
    Senior Member
    Join Date
    Sep 2013
    Location
    Location :
    Country
    Netherlands
    Posts
    305
    Garage empty: add car
    Thanks
    5
    Thanked 19 Times in 14 Posts
    damm your right
    http://www.mitsubishi-motors.com/pub...etail0850.html

    I WANT A 1liter with cvt



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •