Fog lights

[Mistah JT]

Hey guys, not sure if this is the correct place.

Anyone know how to get the globes for the fog lights out?

Want to change my globes to yellow ones, just am unsure how to take them out.

Hope someone can help.

Thanks,

James

[3dplane]

This is what Mitsubishi says!

"caution Don’t touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.



1.Remove the clips of the front wheelhouse splash shield shown in the figure, and turn up the front wheelhouse splash shield.


2.Disconnect the connector and withdraw the bulb.
3.Replace the bulb, and connect securely the connector."


So basically the retainer clips have to come out (at least enough of them to gain access) an the liner folded out of the way.
Then I guess the bulb will have to rotate counter clockwise to disengage like they usually are mounted.

[ShiroMirage]

I actually found a much easier way to replace them. I knew I shouldve taken pics. Lol.

But you dont have to remove ANYTHING. You can get access to them from underneath the front of your car and get your arm around the plastic under tray. If you just look underneath you can see your fog lights from underneath. I'm a short guy and my arms were long enough to reach them with no problem.

I'll try to take pics of it on Monday, so everyone can see how easy it is.

[mirage1768]

Led turn lamp indicator for mitsubishi mirage 2014

[3dplane]

Care to share details about the LED indicator?

[Mistah JT]

Only US mirage would get that, when I was in hawaii I noticed the extra lights that American cars have

[mirage1768]

Care to share details about the LED indicator?

The LED Lights were ordered from Thailand because they do not sell them in the US http://www.ebay.com/itm/181094255085...84.m1439.l2649

[Buksjvr27]

Hi guys hope you can help i want to spray my fog light area, is it molded into the bumper or can the fog light surround be removed??