That's correct. So far I've checked zero valve lash in these engines. But there are two that sound like they have top end clatter. One is a 2015 with...
I'd use a press. Quicker and easier to just pop the spindle in a press. Especially since the abs sensor is probably seized into the spindle so you'll...
I don't remember if this one has been posted or if it's still availible. 2017 with 270k km for $2000. 5spd non-ac car. We're all out of rad supports...
I haven't looked up axle nut torque in a while. Turns out the Mirage and my Kawi side by side both call for almost 200ft lb. I haven't had either one...
I just run them til they pile up then replace the bearings. They usually last a long time. My 14 has over 300,000km and they're still fine. I'd just...
I've seen a few of those trucks with pretty high miles. Here's one that got put into the fleet and driven into the ground and it's still running the...
If the registration or bill of sale/title says is a 2023 then it's a 2023. If it says 2024 then it's a 2024. Model year isn't necessarily the year it...
It's a ratcheting tensioner that I don't think can really lose tension. Is it the same rattle that they typically make on first start up after an oil...
Home Page
Find latest posts
