ok so since i am feeling better after being sick for a few days here is how I installed the new cable if anyone is interested.
the center console panel or whatver its called needs to be be...
ok so since i am feeling better after being sick for a few days here is how I installed the new cable if anyone is interested.
the center console panel or whatver its called needs to be be...
Its the diode dynamics ss3 pod led light. I was thinking of directly connecting it to the stock wiring so it would work with the stalk switch
Hi,
My mirage came with factory foglights.
I am planning on doing an experiment. I found some SS3 foglight copies and I plan on having them replace the stock fogs.
Does any body know if...
Hi,
Was thinking of a side turn signal mod.
Saw this video from Flyride. The guy opened the side markers and installed a led strip and a driver.
Do you guys think that will cause any havok...
Cheapo CF antenna..
15822
Btw.. Used this for a junction lead for wiring... Soldered and crimped the 2 leads for the drl's to the 2 holes in the female spade.. Instant junction.. Easier than doing a soldered t-junction
15734
15718
Mitsubishi sure knows how to deter you from modding.
Pulling out the fuse to put in a fuse tap was the hardest part.
15710
shot with headlights on
15711
oh and I installed a 4 lead switch. switch i chose was for a toyota camry..duh...haha
but it fits, although i had to sand off the corners a bit since they...
ok so got to installing the DRL's yesterday and was a success.
15712
so here is where I tapped. I used the lighter fuse.
15713
this is how I stuck it onto the headlight. i did not want the...