I did make up my own. I wouldn't be opposed to selling some parts.
https://mirageforum.com/forum/attachment.php?attachmentid=23534&d=1656249929
...
I did make up my own. I wouldn't be opposed to selling some parts.
https://mirageforum.com/forum/attachment.php?attachmentid=23534&d=1656249929
...
I no longer sell them.
I went with an OE bearing. It was around $120 online. I saw the rockauto ones. I wasn't comfortable rolling the dice on that haha.
Just got my car back from the mechanic. You certainly do need a press to do a front bearing replacement. Guy even let me know it was pressed in there pretty darn good and they had to heat it up to...
Yeah, they are made of PLA. In summer, the radiator heat will soften the plastic to the point of distorting them so they don't hold on anymore. Originally, I designed it in winter and it simply...
Looks like I missed this thread when you started it. But, as Darin mentioned I do print a fair amount. As I type this I have 3 machines going in the background making products I sell. I have 5...
Small update. I've developed a growl from the front passenger side tire. Looks like I'll be replacing a wheel bearing soon.
My one question is do you need a press to do this, or can you use a...
1)
I have crudely measured power consumption on a 1997 Toyota Paseo (1.5L 4 cylinder). Starter power consumption is not anywhere near linear. It is a huge initial draw with a very quick drop off...
Looks pretty darn good even with the backwards light. Done!
23566
Well, its all done. I'll take a look at it again when its dark, but it popped right in this time. One light is still backwards though. I mirrored the part incorrectly. Oh well. Unless it totally...
This is my V1 fix. It was slightly too long, the lights were a bit too far back, and the lights should be mounted 180 degrees from how they are. The locating pin interfered since I forgot to make a...
As the others have said, if you're looking for better MPG, warmer air is better in general. However, it will lower your horsepower a bit.
The general rule is a 5 degree drop in air temp equals 1%...
I would avoid it and fix it the right way. If its leaking from the core itself, you might just be able to tighten down on the crimps around the tubes coming out of the core. You don't have to take...
Big bummer, but I'm very glad to hear you are okay. I'm sure the Tesla will be a fun replacement!
22963
Background:
Not long ago I noticed my check engine light pop on. Thankfully, I have a scangauge in the car all the time. So, I scanned it and found it was a P0442 code. This code says...
We will look into it. Thanks guys!
I like rainx myself. I use it all summer, but can't really apply it in winter due to the cold. It would be nice to have something that lastst longer.
How many miles on your 14?
I think I'm right around 100k.
Mohammad is correct in his thinking on how it works with the reduction of pumping loss and reducing intake manifold vacuum. The O2 sensor in cars prevents them from running lean for emissions...
You might be able to do this with the crimped style core. While installing mine, I got a little too ambitious with test fitting and tore the tube out of the core a bit. I was able to re-crimp the...
You certainly have to be careful when modifying systems. Understanding how they work is the first step.
However, I've found very little problem with this on the Mirage. When the system finds any...
This is mine. Its an early 70s Simplicity 728. The blower is obviously a single stage. I think its 30 or 32". I converted the tractor to electric over 10 years ago now. Absolutely love it. ...
Very cool! I look forward to seeing what you come up with.
A simple switch won't work because the voltage regulator cranks the output to 15V if it doesn't get any signal.
Doh, that is a bummer. But, its great to hear that you're okay. My aunt and cousin hit a deer once. It jumped before they hit it and it ended up smashing the windshield. My cousin got glass in...
Yep, it'll fit.