This is available locally in the Philippines thru URs distributor. You can check UR website for any authorized shops that is near your daughter in Malaysia. It is cheaper if bought in Malaysia, SRP...
This is available locally in the Philippines thru URs distributor. You can check UR website for any authorized shops that is near your daughter in Malaysia. It is cheaper if bought in Malaysia, SRP...
Stock shocks are from Tokico.
MAP Sensor for 1.2L CVT Philippine Spec - Bosch 0 261 230 358
https://farm8.staticflickr.com/7403/13468830354_531aa11fd8_z.jpg
Rota Grid 2 15x7 offset 40 wrapped in Maxxis MA-Z1 195/50/15. This rim/tire combo's weight is at 15kg compared to the stock OEM Enkei 15x5 wrapped in Bridgestone RE050A weight of 14.3kg.
...
Stock OEM Springs/Shocks:
http://farm4.staticflickr.com/3697/9504214843_68239358a2_z.jpg
GAB SS Coilovers:
http://farm3.staticflickr.com/2437/12978784035_aa95582ce0_z.jpg
The exhaust manifold is located at the back of the engine.
Ok finally got the chance to install the coilovers. Had the rear installed first then the front.
GAB Adjustable Shocks(height, compression and rebound in 32 steps) from the coilover set...
The Bendix equivalent brake pads for the Mirage is the same for the Daihatsu Charade.
Separate springs on the rear with adjustable height. The front coilovers already include the top mount.
L-R: Front Height adjuster tool, Rear Height adjuster tool and damper knobs, Rear Springs,...
GAB SS Fully Adjustable
Part # GSS-MIT027
Spring Rate: Front = 5Kg / Rear = 2.5Kg
Price: RM2600(Malaysia)
http://www.gabsuspension.com/template.asp?menuid=11
...
I'll flip the bar when I get to install the coilovers next month. It'll be easier to fit most stuff on the trunk that way. With the current install, sometimes I have to fold down the rear seats when...
Installed the rear strut bar. Install time is 15 minutes.
Disclaimer: The rear strut bar is not for everyone. If you need the hatch space in its full functionality then this is not for you.
...
Finally installed the Ultra Racing Front Lower Bar for the Mirage.
Install time is 30-45 minutes.
What you need:
Ultra Racing Front Lower bar part # UR-LA4-2026...
Here's a DIY Installation of the ULTRA Racing Anti-Roll Bar.
This is relatively easy to do. Install time is around 30min max.
What you need:
Ultra Racing Anti-Roll Bar part# UR-AR19-422
...
Here's a DIY Installation of the ULTRA Racing Anti-Roll Bar.
This is relatively easy to do. Install time is around 30min max.
What you need:
Ultra Racing Anti-Roll Bar part# UR-AR19-422
...