I added the missing cruise control led today. It was not really easy for me to solder this extrem small transistor, especially for me as a beginner in soldering, but at least it worked :-). I've...
I added the missing cruise control led today. It was not really easy for me to solder this extrem small transistor, especially for me as a beginner in soldering, but at least it worked :-). I've...
Not sure, but all I needed was the normal driver for the mini vci and a fix for the MUT program found here, be careful spending mega dollars for miracle fixes
This is the fix for MUT that allows...
Done some testing and things are looking promising..going by the Diagram to get it going....the car can now Cruise!...will do some more testing over time.
Although I can see we have NO Cruise LED...
Updated Drawing with Clutch Switch ECU Pin number - and updated drawing elsewhere
2015 Mirage RF. - I added a subtle pinstripe along the swooping upper crease line. Also included a "three diamond" logo near the side marker light just for fun! :D.
25436254372543825439
Washed it and did a little wheel Hokey Pokey
25357
25358
25359
Gonna make a garage post tomorrow with more but installed some DIY mudflaps, and updated some interior details.
25351
25352
25353
Hey, y'all!
Looks like I've not posted here since March 2021. No, it's not you, it's me!
When COVID hit, my autocross club (the one that I actually operated) canceled all of our events. After a...
I just disassembled the rear brakes on my 2015 for the first time last weekend. I took a lot of pictures so I would remember all of this for next time. :D Here are a few ideas...
EDIT/TIP - If...
23591235922359323594235952359623597235982359923600236012360223603
I have a ton of pics to upload from over the years. I’ll dump them here for meow then try to put them in the appropriate or own threads eventually unless a grown up(mod) gets to it first.
23581...
Everything moved to post #26
22597
22598
22599
22600
22601
22602
22603
22595 22596
Hey all, thought you guys would want to see the results of my turbo 3a92 on the dyno!
I was making this power with around 15psi the max torque figure was at about 17psi before the pressure drops...
Correction: our bars is 18mm. Just installed the prothane bushings on the stock sway bar and it fits very well.
Through my windshield, any Mirage out on the road looks great. Go Mitsubishi! :)
Retrofitted the Lancer LEDs into the 2021 reflectors. :)
https://mirageforum.com/forum/attachment.php?attachmentid=20874&d=1617027419...
Springs have to be stiffer if you're lowering the car. If you don't make the springs stiffer, you risk bottoming out the suspension. There's math involved, but basically:
Imagine you've got 6" of...
I replaced the stock rear shocks (Mitsu 4162A199) with KYB-Asia 348083.
Reason for replacing was to get rid of the rear bobbing up and down over mild bumps. It has been like that unchanged from day...
Hi folks, it has been practically impossible to get rear shocks from any other maker than Mitsubishi. We know of the too soft rear shocks that make the back of the car bob up and down, making rear...
So I rolled my fenders this past weekend and it went great for a beginner. I also used the finishing pliers to help it flush up a bit. I can fit my 15x7+38 195/45 without any scrubbing issues except...
Since my engine has twice been so badly gunked up it wouldn't start, I installed an inexpensive catch can. Installation was easy and only took a few minutes. The can is actually a filter, and was...
Completed the Automatic Air Control Unit leds from orange to blue, the shifter selector area, the bulb wasn't led, it was incandescent. The P, R, N, D, and B were colored orange on the inside so I...
15928
15929
15930
I found a very interesting documents from europe tech site
The schematics is for Space Star which is Europe version of Mirage G4 or Attrage
I subscribed for 1 hour session and I downloaded the...