Search:

Any dealer who spots this modification will use it to deny warranty claims. Consider this method as a last resort.

With the mounting holes enlarged, would a good bump shift the axle out of...

I think it’s a potential solution especially for cars that are out of warranty. Thanks for the video.

For owners who are still covered by warranty, please check with your dealer first. There is...

I don't recall that. Many of us (myself included) had the axles replaced (bent most of us believe during original shipping) with new ones under warranty and everything was spot on.

Tire Rack has a very rigorous set of testing parameters that it does in house. Those numbers are from their tests on their scales. Price doesn't factor in... at least it's not supposed to, although I...

All fixed up. Cleared the codes and the light stayed off. I sternly told the wife to try and keep the car cleaner on the inside. Food scraps and crumbs is what caused this issue. I got home and did a...

After further inspection I found this under the door sill plate and fixing it now.

I got the rear seat out and removed the access plate to the fuel pump. I found no evidence of rodents or chewed wiring. Tomorrow I take it to work and get it on the lift for more inspection. If I...

Got a call yesterday about a Mirage that wouldn't move from a stop, they had someone push it and heard a bang then it started driving again. They got it back to their location and I went to pick it...

So the wife tells me the check engine light came on so I told her to swing by the shop after work. I hooked up the scanner and got these codes.......

P0441
P0450
P0452
P0183

These codes are...

Make absolutely sure it is not a broken clutch cable. My car has gone through three of them and it is a very common failure. I have never heard of a throwout bearing simply letting go on one of...

https://www.youtube.com/watch?v=RX8C2aWL2sQ

I can’t. Doug Demuro gets paid with every click.

@MetroMPG

https://www.prnewswire.com/news-releases/mitsubishi-motors-announces-strong-first-quarter-2024-sales-302106058.html

Spoiler alert: G4 is still not performing well :( as I have had...

Once again, I got a request for a part that I've never ever seen wear out on these turds. There's a few Mirages in other locations too far for me to service them regularly so they're dealt with...

I added the missing cruise control led today. It was not really easy for me to solder this extrem small transistor, especially for me as a beginner in soldering, but at least it worked :-). I've...

The path is posa go real close to Cape Girardeau. Isn't that where Dirk is moving?

Dirk better wait until after it passes, to make sure there's anything left there to move to.

I bought my Mirage ES brand new in April of 2014, and have only owned my Mirage since then. Now a decade later, and I have 218,000 kms on the odometer. Mirage replaced my 1998 Ford Escort wagon....

The company that installs our windshields managed to get the only aftermarket one in Canada a few month ago(at the time). I can't remember what it cost, about double the cost of a normal one. Dealer...

Or maybe they're including repair costs, in which case the Mirage wins. I know it's not stated that way, but it should be. Everyone knows the Mirage is the better value. :)

I skimmed through fast and reading is hard so maybe I missed the part explaining how it's the cheapest car in America. They posted the msrp of a Versa is less than the G4 so maybe I'm dyslexic today?

Heater is a standard 1000w heater with a 100-110f thermostat that we installed on every standby diesel generator…


Just finished reflushing the heater core this morning with garden hose, flushed...

Just bought a cheap ass fountain pump at a local hardware store, took one of the cheapest one that could only lift 3 feet high…
The output was only 1/2 inch but a 5/8 hose would fit with a collar...

After 24h of running mineral spirit trought my heater core the liquid is really getting darker but there’s still not that much more flow
You can clearly see that there’s more sediment in the bottom...

I’m in the process of cleaning my heater core with mineral spirit
I’m using a small pump to circulate the mineral spirit in the heater core with an inline heater with an internal 100f thermostat...

I do that when I'm too lazy to walk across the shop or just want to feel like the hulk.

I forgot about that tool. I have one of those too, but my go-to is usually just a medium sized pair of...