Search:

Just measure the hole once you've removed the wiper. Easy to find something to plug into it if you want to go that route.

https://www.amazon.com/Baomain-Plastic-Black-Locking-Diameter/dp/B01LXKQ1UB

It's something like a 7/8" hole. You could get a plug for it. I actually looked it up and considered doing it that way. You can get a plug on Amazon or wherever. I just liked the sticker idea better....

I removed mine. Two pounds of extra weight, and I hate rear wipers, anyway.

There's some kind of trim piece on the inside of the hatch. Probably held in with push-pins or something, I don't...

Wow, your Mirage looks great! That blue really is a nice color on the facelift models. The white rims really offset it nicely, as well.

Keep up the good work! ��

I rolled my rear fenders. Takes 15 min per side. I haven't noticed any rust and I've driven through a winter here in Canada where we get salt on the roads.

Also, with my 195 tire, the tires...

I just went to AutoZone's website and they flat-out have the wrong valve stem listed for the Mirage. :rolleyes:

Here's a pic below... You want the valve stem on the LEFT...it has a metal 'barb'...

Hey OrcaNinja: Great photo with your 86 and your Mirage!

Be smarter with the google. The last 6 digits of every mirage are not gonna be the same....There's a metal tag on the rh b pillar, check for chassis code there. Like Loren already stated, 2013-2020...

Yes, they will.

What has been shared before me may be better than what I am going to share. A reputable Mitsubishi dealership charges $599 (parts/labor) to add cruise to a Mirage. They use an after market system....

It's not quite as easy as plug 'n' play.

Even if the wires were there, you still need to program the computer to enable cruise after you add the switch. You also need to ensure the...