Search:

Just bought a cheap ass fountain pump at a local hardware store, took one of the cheapest one that could only lift 3 feet high…
The output was only 1/2 inch but a 5/8 hose would fit with a collar...

After 24h of running mineral spirit trought my heater core the liquid is really getting darker but there’s still not that much more flow
You can clearly see that there’s more sediment in the bottom...

I’m in the process of cleaning my heater core with mineral spirit
I’m using a small pump to circulate the mineral spirit in the heater core with an inline heater with an internal 100f thermostat...

I sincerely hope that Karma comes back on that guy & bites him in the ass,hard....

One online customer asked for a video clip of the machine in question running.
I had multiple photos already...

I only notice a difference when I run an engine without oil. I honestly don't know how anyone can tell a difference in running any type of oil, but my hearing is not what it used to be? :)

^
https://media1.tenor.com/m/JIS_KDKKsgYAAAAd/guaton-computadora.gif

So ... translation ... does this mean the Klondike Full Synthetic 0W20 is no good, and Fummins has been going around deliberately busting all his fleet Mirages?

Teardown video of this engine


https://youtu.be/xI44Ic353vI?si=7KR9xU5lPLdK6iRb

No. Just showing how hilariously tiny they are. I lost my long t50 so can't get the head off or the pistons out. They won't come out the bottom. So far everything looked to be in great shape. I'm...

https://mirageforum.com/forum/attachment.php?attachmentid=26167&d=170105285826202 and the bolt that holds the abs wire bracket broke off inside the control arm. I should cut the head off a bolt and...

So...this isn't a good place to ask what tires are best? :eek: :cower:

Folks, thanks a ton--it worked! A teaspoon oil in each cylinder (had to do it twice), and we were good to go.

If in that part of Missouri they salt the roads spend the couple of hundred bucks and get that Mirage treated with Krown or some other reputable treatment before the snow starts. There is a shop in...

Hey all! I do car detailing as a side hustle and wanted to share an updated guide on how to detail your Mirage and have it looking on point! Hopefully this will be the first of many guides. I will...

Ask to see his setup in his garage and if possible pictures or some kind of review from other customers.

How did the mechanic know it was conventional oil? Be leery of anyone that tells you things like this. You can't simply rub it between your fingers and know what it's made of.

I bought my Mirage in 2018 used with a certified flood rebuilt title. It was out of Hurricane Harvey. It had like 32k on it when I got it. I was warned not to get it. Gut said to do it anyways. I now...

Fly down ride back? Or load it into the truck, what could go wrong
https://www.youtube.com/watch?v=FS01nVTDKuE

I'm going through some pics on my old laptop. Found some of my old Dodges. Figured I'd dump them here before this thing crashes for good.
Here's the 02.
25467

25468
The 97 I bought after the...

25449
Multitasking

2015 Mirage RF. - I added a subtle pinstripe along the swooping upper crease line. Also included a "three diamond" logo near the side marker light just for fun! :D.
25436254372543825439

Edit: added video's finally...
This will hopefully be a bit of a write-up on how to replace a CVT. I'll just try to write the steps that I do. Others may do things differently. I've done this using...

I assume you mean that un-staking the axle nut was a pain in the butt?

They do make a specific tool for this and it works really well. One example is the Matco MST6438-2. Place this tool in...

the idea is to monitor the output voltage of the sensors at various RPMs if they are operating normally or not.

The FSM gives the oxygen sensor as one possible cause of P0421, however, as there...

I sort of carefully read the factory service manual to discover how the auto up function works. The motor current does not appear to be measured, instead the Mirage uses 2 hall effect sensors to...