Well, this entire deal came out as inconclusive. I took it for a 10 min drive and no more abs codes. It'll probably come back on when they pick the car up which might be a while.
Well, this entire deal came out as inconclusive. I took it for a 10 min drive and no more abs codes. It'll probably come back on when they pick the car up which might be a while.
What about trying a dodge dealer(Dodge attitude mexico market), probably out of stock too? https://parts.chryslerjeepdodgecityofmckinney.com/p/HUB-MT-1ST--2ND-SYNCH/78170049/2551A254.html
I have a 2015 Mirage here right meow that came in for an unrelated reason, and as per usual I find bigger problems. Complaint was washer fluid tank leaks I bring it inside with the abs, brake and...
Every single time I start considering buying something else it never goes further than posting about it then the dream dies after remembering my little black turd still works and costs next to...
12x60x1.25
26980269812698226983
269762697626977 they’re the same bolt
Did a few things to the turd today. Oil change, mounted the airbag module(with bolts), almost swaped tires over.
318351km oil change. Used motomaster 5w30(conventional I assume) cause I already...
I’m 97% sure it’s the same bolt for either end of that dog bone mount I can double check later tomorrow.
If so it should be #7 26975 MF911992
26968
269642696526966
Here's one https://www.ebay.com/itm/235080253123
Welcome! I think you've got the highest mileage Mirage on the Forum now. The highest in the fleet I maintain has 565,000km/351,000miles.
Chances are you have a broken wire in the harness along...
https://www.youtube.com/watch?v=CMNry4PE93Y
There's a thread for cheap Mirages, this one is for the other ones. I guess it never hurts to ask more than something is worth because most people seem to dicker. But, I won't bother inquiring about...
The rotor isn't bolted on. They rust in place. There should be one or two threaded holes that you can thread a bolt into to help press the rotor off. I can't remember the thread size but it's pretty...
Got a call yesterday about a Mirage that wouldn't move from a stop, they had someone push it and heard a bang then it started driving again. They got it back to their location and I went to pick it...
My random internet guess is wiring under the back seat. Fuel pressure sensor and temp sensor are both part of the fuel pump assembly. 2 codes are for evap pressure, 1 fuel temp and the other purge...
I usually don't have any driveability issues after replacement. I think I had trouble with one acting weird after replacing the valve body or fluid change. I can't remember, too many beers ago. Ended...
I just use universal cvt fluid. It's brown and comes in a plastic bottle. Says meets J4 spec on the label.
I use the same stuff in other Jatco cvt's in Nissans as well and haven't had any issues...
Yeah, 2014-2022 for sure. They list a different part number for early 2014 but I installed a 2017 cvt in my 2014 Mirage that has a 2013 production date. I couldn't find an early one so took a gamble....
2691826919269202692126922
Yeah, spray the gasket and pan with brake cleaner. I usually have good luck re-using the old gaskets without leaks as long as everything is clean and dry.
The valve body is pretty straightforward...
Got back last night. Awesome trip! Van did great. Was far from great on fuel but it weighs a bit more than I thought at 5700lbs. I only wrecked a few little things and only got stuck once. Didn't see...
Once again, I got a request for a part that I've never ever seen wear out on these turds. There's a few Mirages in other locations too far for me to service them regularly so they're dealt with...
If you drive a ways out of the city you can sometimes see them. Used to see them more up around around lesser slave lake about 200 miles north. I've never seen them look like they do in the pictures...