Remote lock behavior programming
From the 2015 Mirage manual.
Quote:
Originally Posted by Page 5-6 of the 2015 Mitsubishi Mirage Owner's Manual
The door and liftgate unlock function can be set so that all doors and liftgate unlock when the UNLOCK button (2) is pressed once. Refer to “Setting of door and liftgate unlock function” on page 5-7.
Lots to fiddle with:
Quote:
Originally Posted by Page 5-6 of the 2015 Mitsubishi Mirage Owner's Manual
Answerback function
The horn of the keyless entry system answerback function can be changed as required. This is done with the key removed from the ignition switch.
Quote:
Originally Posted by Page 5-7 of the 2015 Mitsubishi Mirage Owner's Manual
Note
The answerback function will not operate if any of the doors are open.
Quote:
Originally Posted by Page 5-7 of the 2015 Mitsubishi Mirage Owner's Manual
Horn deactivation/reactivation
The answerback function can be set in the following three ways.
Each time the answerback function is set, a chime will sound to tell you the condition of the answerback function.
One chime: The horn will not sound.
Two chimes: The horn will sound.
Four chimes: The horn will sound if the LOCK button is pressed twice within 1 second.
1. Remove the key from the ignition switch.
2. Open the driver’s door and turn the combination headlights and dimmer switch to the “OFF” position.
3. Press the LOCK button (1) for 4 to 10 seconds and press the UNLOCK button (2) during this time.
4. Release in sequence the UNLOCK and LOCK buttons within 10 seconds of pressing the UNLOCK button in step 3.
Quote:
Originally Posted by Page 5-7 of the 2015 Mitsubishi Mirage Owner's Manual
Turn signal lights deactivation/
reactivation
The turn signal lights answerback function can be changed.
If you want to change the answerback function, please contact an authorized Mitsubishi Motors dealer.
Quote:
Originally Posted by Page 5-7 of the 2015 Mitsubishi Mirage Owner's Manual
Setting of door and liftgate unlock function
The door and liftgate unlock function can be set to the following two conditions.
Each time the door and liftgate unlock function is set, a chime will sound to tell you the condition of the door and liftgate unlock function.
Number of chimes |
Condition |
One chime |
All doors and the liftgate unlock |
Two chimes |
Driver’s door unlock only |
1. Put the operation mode in OFF.
2. Open the driver’s door and turn the combination headlights and dimmer switch to the “OFF” position.
3. Press the LOCK button (1) for 4 to 10 seconds and press the UNLOCK button (2) during this time.
4. Release in sequence the LOCK and UNLOCK buttons within 10 seconds of pressing the LOCK button in step 3.
Hope that answers your question.
Cheers!