I just looked at mine, even with a US cluster in MPH, it has the same 120km/h indicator there. I guess that is what the speed warning option in ETACS decoder is for.Quote:
Originally Posted by Top_Fuel
I just looked at mine, even with a US cluster in MPH, it has the same 120km/h indicator there. I guess that is what the speed warning option in ETACS decoder is for.Quote:
Originally Posted by Top_Fuel
If you look closely @ TopFuel's post #26, you can see it, too!Quote:
Originally Posted by DimensionTheory
It appear many features exist on these world-wide cars. Canadians have DRL (daytime running lights) enabled, & we have TPMS for example.
Yeah but someone here enabled cruise on their Mirage and found the indicator on the cluster doesn't work because there was no led on the circuit board. There might be more to it than just enabling it in the etacs?
Possibly a 2014 that didn't come with the stalk?Quote:
Originally Posted by Fummins
I'd love to attempt to add it but unless I can get all the parts rounded up for under $50ish, it wouldn't be worth it, I'd never get much chance to use it.
If you have a car with 'factory' blue tooth controls on the wheel, not dealer added on buttons on the dash, then you can just add the buttons on the wheel, add a switch(if different) and enable it in etacs.Quote:
Originally Posted by DimensionTheory
The guy who found the led was missing only posted about it in the last week or so but I gave up trying to find the thread. He was from Canada, is all I remember.
I ordered a Mini-VCI cable from Amazon last night.
Cover me, I'm goin' in!
Great! If you are able to duplicate this, be sure to take some screen shots along the way so we know exactly how to duplicate it.Quote:
Originally Posted by Loren
I'll probably mess around and dig deeper into the program more this weekend, if the weather cooperates. It's kind of a hassle running a cat5 cable out to my car from my house lol. But I'll start a new a thread or add to an existing one that's on topic with any features, pictures, what does/doesn't work (as far as the ones I'm comfortable altering...). Also sorry for partially thread jacking.
I was able to enable front and rear fog lights with my scanner. At least the lights on the cluster would come on, not sure about any of the wiring getting power, probably need to add a relay somewhere and not sure if the wiring is even run for the rear fogs. I doubt it. Sorry for continuing the thread derailment. Again.