Recommendation: Front light bar?

[TheLandYacht]

This is exactly the setup I'm looking for. I'd probably swing those projectors slightly out to the sides just slightly so they illuminated the sides of the road (I admit it would be a balancing act, though), since I drive dark country roads...and that's my concern, animals about to run out on me.

[minibishi2]

This is exactly the setup I'm looking for. I'd probably swing those projectors slightly out to the sides just slightly so they illuminated the sides of the road (I admit it would be a balancing act, though), since I drive dark country roads...and that's my concern, animals about to run out on me.

I bought all this on amazon and home depot. There is great coverage everywhere including in the fields and trees. The projectors are 3" so they all throw wide. The lightbar is a Nilight https://www.amazon.com/Nilight-15Inc...%3D%3D&sr=8-54

[TheLandYacht]

And the little bully-bar? And how did you go about mounting that to the car?

[7milesout]

I'll go back and read the post in its entirety, because I may be redundant. But I wouldn't be interested in any light source or accessory that increases (wind) drag. Maybe something at or behind the grill though. It may increase drag a bit, but not like sticking something up in laminar (or somewhat laminar) airflow.

[TheLandYacht]

Bump:

Do you also have a link to where you got the "Push Bar" that it's mounted to?

...and maybe some pics and/or description of how/where it's mounted to the frame of the car?

Thank you

[minibishi2]

Bump:

Do you also have a link to where you got the "Push Bar" that it's mounted to?

...and maybe some pics and/or description of how/where it's mounted to the frame of the car?

Thank you

https://www.amazon.com/Nilight-Mount...s%2C122&sr=8-5

This mounts to the metal crush bar behind your bumper. I used spacers, bolts, washers and nuts

[TheLandYacht]

https://www.amazon.com/Nilight-Mount...s%2C122&sr=8-5

This mounts to the metal crush bar behind your bumper. I used spacers, bolts, washers and nuts

Thank you so much.

[Eggman]

Soon I'm switching out the little push bar for a large one from a tacoma and getting a larger light bar and more high/low projectors.

This will be one lit Mirage. When do you plan on doing this?