Results 1 to 10 of 27

Thread: Install a Rear Camera on Mirage / Space Star

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member hellstens's Avatar
    Join Date
    Mar 2013
    Location
    Thailand
    Country
    Thailand
    Posts
    32
    Thanks
    0
    Thanked 13 Times in 7 Posts

    Install a Rear Camera on Mirage / Space Star

    Its easy to install the rear camera if you have a Clarion NX509 or T-01 in your car

    1. Camera connector block. Left side back of the car
    The white wire is video, the ground is gray.
    Use the backlight wire for +12v
    2. Some people may be connected to the new connector. But I cut it and then solder them.
    3. Use a camera of performance. Reasonably good quality.
    4. Do not forget to finish off the plug on the original place.
    5. Set the camera ⇒ General NTSC or PAL, but i use the PAL version of the camera, Try it.
    6. The camera, Screw it, or use the 3M tape.

    Good luck!
    Attached Images Attached Images       

        __________________________________________

        click to view fuel log View my fuel log 2013 Mirage GLS ltd 1.2 automatic: 47.2 mpg (US) ... 20.1 km/L ... 5.0 L/100 km ... 56.7 mpg (Imp)


  2. The Following 3 Users Say Thank You to hellstens For This Useful Post:

    DemiRage (10-06-2014),FreeYourSOUL (05-10-2017),MetroMPG (03-19-2013)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •