DIY: 2017+ Rear Reflectors swapped to LED's

[mitsumi]

Ok i think ingot this hehe.

But should i tap this to clearance or the brake wire?

mine doesnt have any reverse light.

is this correct

Drivers Clearance: Green/Red = Red wire
Drivers Brake: Green/Yellow = White
Drivers Reverse: White/Blue = none

use the negative from reverse wire

Passenger Clearance: Green/Red = Red wire
Passenger Brake: Green/Yellow = White wire
Passenger Reverse: White/Blue = none

use the negative wire feom reverse wire

is this correct?

[Dark Magenta]

I recently got the red ones (not the smoked ones or the clears that work with reverse lights). The wires are black, white, yellow and red. I got the ones that should have the sequential turn signals. Does anyone have experience to share about which wires to connect with these reflector replacements?

Also, they look like they are already sealed. Do they need further sealing (beyond sealing the splices)?

[Alex1a1f]

I recently got the red ones (not the smoked ones or the clears that work with reverse lights). The wires are black, white, yellow and red. I got the ones that should have the sequential turn signals. Does anyone have experience to share about which wires to connect with these reflector replacements?

Also, they look like they are already sealed. Do they need further sealing (beyond sealing the splices)?

I'd still seal the back to front. Black is ground and test others for function.

[Alex1a1f]

Retrofitted the Lancer LEDs into the 2021 reflectors.




And in action!

https://youtu.be/I-gshk1FbiQ

[mitsumi]

@Alex1a1f
how did you install the new TL? is that plug and play? any sample pics for the rear TL wiring or socket?

[Alex1a1f]

@Alex1a1f
how did you install the new TL? is that plug and play? any sample pics for the rear TL wiring or socket?

The TLs are plug and play.

[sunbeam]

Trying these on a 2023 will report back the tailights are more vertie style so hopefully it still fits.