That would work up until the point that you drove past another Mirage with the same 4 sensor ID numbers. Then the systems in both cars would freak out because they would be receiving multiple pressure readings from the same sensor ID. That's one of the error codes in the TPMS system.
Originally Posted by Mark
You won't get an argument from me on that. Apparently most Asian manufacturers do their TPMS systems the way that Mitsubishi does. Some manufacturers have made TPMS replacement a fairly simple process. On most GM cars, you can reprogram your own sensors in a couple of minutes using your key fob.
This whole system seems way more complicated than necessary.
When this thread started, it was unclear if you could clone the TPMS sensors used in the Mirage. So everyone was focused on how to get 2 sets of sensor IDs stored in the computer (which...as it turns out...can't be done in Mirages sold in North America anyway ).
But it's now clear that cloning Mirage sensors is completely do-able and is the easiest way to handle multiple sets of wheels/tires being used on the same car. It's also the easiest way replace a dead sensor without having to involve a dealer.
The biggest mystery about the Mirages TPMS system is that it appears to be unique to the Mirage...even among other Mitsubishi products. Aftermarket TPMS tools that will work on the Outlander will not work on the Mirage!?!
Last edited by Top_Fuel; 04-16-2018 at 03:31 PM.
View my fuel log 2015 Mirage ES 1.2 manual: 51.4 mpg (US) ... 21.8 km/L ... 4.6 L/100 km ... 61.7 mpg (Imp)