@FreeYourSOUL THX I bought a cable from crashed car and disconnect pins

I made all wirings that are missed. I change a Clock sprong from 5 to 10 Pins. But i have some problems.
1. I have 5[V] on ECU pin 94 so i put a cable on ECU 3rd connector pointing from right side (C-227).
2. I change brake switch to 4 pins and make a extra wirings but on Pin 121 in conector C-228 i don't have any Voltage it is right?

Any idea what mistake i made?
I make some photos and film. The stering wheel wokr fine it chnge voltage properly.

PLS HELP!

Name: img_20200530_150403.jpg Views: 1555 Size: 99.3 KB
Name: img_20200530_150323.jpg Views: 1390 Size: 90.7 KB
Name: 1.jpg Views: 1437 Size: 97.7 KB
Name: img_20200530_141347.jpg Views: 1299 Size: 100.3 KB

And Film