Page 9 of 10 FirstFirst ... 78910 LastLast
Results 81 to 90 of 99

Thread: Adding OEM Cruise Control On A 2017 Mirage G4

  1. #81
    Senior Member
    Join Date
    Oct 2016
    Location
    Malang
    Country
    Indonesia
    Posts
    103
    Thanks
    36
    Thanked 83 Times in 53 Posts
    Modified my clockspring, donor cable from outlander/asx's clockspring. Now I have full 10 pins for cruise control.

    Name:  20190129_184116.jpg
Views: 127
Size:  92.5 KBName:  20190601_232526.jpg
Views: 147
Size:  96.3 KBName:  20190606_102803.jpg
Views: 135
Size:  84.6 KBName:  20190606_114856.jpg
Views: 140
Size:  80.2 KBName:  20190606_121006.jpg
Views: 139
Size:  81.9 KBName:  20190606_121021.jpg
Views: 149
Size:  83.0 KB



  2. #82
    Junior Member
    Join Date
    Feb 2019
    Location
    SAUDI ARABIA
    Country
    Saudi Arabia
    Posts
    22
    Garage empty: add car
    Thanks
    4
    Thanked 6 Times in 4 Posts
    That's great work
    But you didn't need to, the clockspring from the outlander will work just fine, I tried it already.
    The part number is : 8619A362, it can be found genuine & new for around $50 on eBay, or maybe you can try the ASX's part number : 8619A167 which can be found from china for around $11

  3. #83
    Senior Member
    Join Date
    Oct 2016
    Location
    Malang
    Country
    Indonesia
    Posts
    103
    Thanks
    36
    Thanked 83 Times in 53 Posts
    Quote Originally Posted by WALEEDMANGO View Post
    That's great work
    But you didn't need to, the clockspring from the outlander will work just fine, I tried it already.
    The part number is : 8619A362, it can be found genuine & new for around $50 on eBay, or maybe you can try the ASX's part number : 8619A167 which can be found from china for around $11
    I bought 8619A167, it's smaller than mirage's and has different type of clamp. The right one is 8619A362, I asked some sellers but it's no longer available.

  4. #84
    Junior Member
    Join Date
    Feb 2019
    Location
    SAUDI ARABIA
    Country
    Saudi Arabia
    Posts
    22
    Garage empty: add car
    Thanks
    4
    Thanked 6 Times in 4 Posts
    Good to know, because I was planning to buy it after I saw your post
    But I can confirm that part number : 8619A362 works perfectly on Mirage, but it has an extra airbag cable
    I have 2 new ones if you are interested, but the shipping will take long time

  5. #85
    Senior Member Dirk Diggler's Avatar
    Join Date
    Mar 2019
    Location
    Atlanta, GA
    Country
    United States
    Posts
    1,057
    Thanks
    345
    Thanked 108 Times in 95 Posts
    Quote Originally Posted by Patrick_Henry View Post
    Hello all, new to the forum. I bought a 2017 Mirage G4 back in November 2016 and it came without the feature that I really wanted the most besides A/C, cruise control. I looked at the aftermarket options, Rostra makes a kit for it. But it's the stalk type and would have to be mounted on the shroud around the steering column. I really don't think there's enough room for it and even if there was you wouldn't be able to see it for the steering wheel. So I stopped by the stealership that I bought it from on my way home from work just to see what the OEM setup would cost. The guy in the parts dept. couldn't find a listing for it so he had to call I'm assuming a Mitsu parts hub. They gave him the part number for just the switch that mounts on the steering wheel and told him that it was pretty much plug and play, the wiring for it was already there. So the parts guy called the service dept. and supposedly was told that it was 1.5 hours labor and no programming required. I thought to myself, this is great, all I need is the switch itself. So it's right at 200 bucks and is supposed to be there tomorrow. So I told him that I was going to do it myself if it was going to be that easy. But I get home and looked under the footwell where the clutch pedal is. There's no clutch disengagement switch there for it. So I called the parts dept. back and informed the guy about it. He was supposed to make a call and get back with me on it but hasn't yet. I was just wondering if anyone here has done it with the OEM switch/setup? I found a thread here that dealt with this issue. But I'm pretty sure it was for 2014/2015 models. And it may all be the same. Hopefully someone here has done it and can tell me how much trouble it is.
    Just had the Rostra stalk unit installed in my girl's G4 for $560. Works like it came from the factory. Its an independent computer system too so no need to worry about it affecting the ECU.

  6. #86
    Junior Member
    Join Date
    Feb 2019
    Location
    SAUDI ARABIA
    Country
    Saudi Arabia
    Posts
    22
    Garage empty: add car
    Thanks
    4
    Thanked 6 Times in 4 Posts
    Did anyone tried the clock spring part number : 8619A361 it has 10 pins and 1 airbag cable.

    The other part 8619A362 works perfect but it has 2 airbag cables

  7. #87
    Senior Member
    Join Date
    Oct 2016
    Location
    Malang
    Country
    Indonesia
    Posts
    103
    Thanks
    36
    Thanked 83 Times in 53 Posts
    Quote Originally Posted by WALEEDMANGO View Post
    Did anyone tried the clock spring part number : 8619A361 it has 10 pins and 1 airbag cable.

    The other part 8619A362 works perfect but it has 2 airbag cables
    I think 8619A361 will work, both are same except 8619A362 has extra unused cable.

  8. #88
    Junior Member
    Join Date
    Aug 2018
    Location
    Florida
    Country
    United States
    Posts
    4
    Garage empty: add car
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by FreeYourSOUL View Post
    I think 8619A361 will work, both are same except 8619A362 has extra unused cable.
    I went to the dealership. They were unable to activate the cruise on the ETACs. They said the computer sees that it came from the factory without cruise. They got it enabled for a minute , however it wouldn’t let them save it... go figure

  9. #89
    Junior Member
    Join Date
    Aug 2018
    Location
    Florida
    Country
    United States
    Posts
    4
    Garage empty: add car
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mine is a 18 es

  10. #90
    Junior Member
    Join Date
    Feb 2019
    Location
    SAUDI ARABIA
    Country
    Saudi Arabia
    Posts
    22
    Garage empty: add car
    Thanks
    4
    Thanked 6 Times in 4 Posts
    Don't trust the dealership, just buy a mini VCI cable off eBay, Download ETACS decoder, and change the coding it will work right away.
    You need to change 2 values to > present (cruise control & cruise control coding) all in Engine ECU not ETACS

    I think US cars are pre-wired for cruise, if not ? then you have to wire it



  11. The Following User Says Thank You to WALEEDMANGO For This Useful Post:

    Fummins (07-31-2019)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •