Wow those are good pictures.
Wow those are good pictures.
__________________________________________
View my fuel log 2015 Mirage ES 1.2 manual: 49.6 mpg (US) ... 21.1 km/L ... 4.7 L/100 km ... 59.5 mpg (Imp)
Rockabilly Manta (03-26-2019),WALEEDMANGO (03-27-2019)
That's weird .. Are you sure these for the Asian market model ?
Is the ones in the picture already have wires in it ? should I remove the wires or what ?
Yes, i'm sure. I have Mitsubishi Mirage from Thailand factory and Mitsubishi Xpander from Indonesian factory. Both have identical wiring and ECM for cruise control.
WALEEDMANGO (03-27-2019)
I bought 8602A134, one with piano black finish from Aliexpress. The maker is GAC.
My steering wheel is also new, 2018 model CVT Europe, but I bought older silver switch, thinking that it need same resistors as 2012-2015 model.
Aaaaand i was right!
it was massacre to joint two different
switches, milling, cutting, glueing....
Finaly, it was in, ETACS did good job, than test.
Aaaaaaaand it sucks.
I found that i dont have 5V on switch, but have it on other side of clock spring. There is 5 of 10 wires in clock spring, one of 2 rows. 1 is horn, 2 and 3 audio, 4 free, 5 light for switches, secound row for adptive cruise control with 4 wires. Now i have cruise control in 4. and 5. position, for price of button lights.
Aaaaaand it works
Last edited by Rockabilly Manta; 04-03-2019 at 08:54 PM.
Daox (04-03-2019)
That's great,
If you can get any pictures for the whole wiring it would be great.
I think your car was pre-wired for cruise control so you just needed the right switch and ETACS coding.
The problem with Asian models it didn't come with the pre-wiring so all have to be done, and another problem is the clock spring
that doesn't have all the required pins, so in order to make use of the current one I have to remove the audio controls wires and replace it with cruise control switch wires
Found this picture, clockspring with full pin/wire has extra airbag cable.