Adding OEM Cruise Control On A 2017 Mirage G4

[CasCas11]

Hello everyone!
I have got a 2019 Space Star (European Version of Mirage) with 1.2L and with the highest equipment called "Invite".
I really love the car but im missing the cruise control and i got very angry that the 2020 and 2021 have a faktory one so i decided to go ahead and try adding it in. The threads that already are here realyy helped me out a lot but i am just about to quit so i decided to write to you guys.
I did the following:
1) Bought a CC switch from a 2015 ASX
2) Flashed the ECU with MMCodingWriter (the two CC settings in the engine compartement)
3) Checked if i have the necessary Clutch and Brake switches (both where already build in brake has 4 Pins)
4) Bought a new clockspring form a 2019 Space Star with 10 pins and swapped the Angle sensors. (After install everything was working fine, no checklight or alarms)
Afterwards i tried it and it didnt work. CC and the Led both didnt function. So i took myself some time to do some troubleshooting and it seem as the necessary cable to the Pins of the ECU are there and there is 5V on one of the two cables behind the clockspring. I also checked the cable in the steering wheel and i had connecntions.
I am going to attach some pictures for you guys.
i hope you can help me i tried everything but i am not going to give up on this! I thought (because the cables where already there, that this was going to be plug and play but well...)
Thanks!

[FreeYourSOUL]

1) Bought a CC switch from a 2015 ASX
Afterwards i tried it and it didnt work.

wich switch? one with matte silver line or piano black?

[CasCas11]

Ok i think i found the last possible problemmaker: Its the switch itself: i tried to mesuare the resistance on the buttons and i think they are wrong but now i need help to figure out what resistors i need and where exactly to install them. if anyone could please tell me with smd resistors i have to change?
thanks!

[FreeYourSOUL]

i need help to figure out what resistors i need and where exactly to install them.

[CasCas11]

Thanks FreeYourSoul!

swapped the resistors and everything is finally working out just fine. The led in the cluster isnt working but i dont want to take the cluster apart jet

[vanchonngo]

I think you are pointing athe the wrong pin. 121 should be on the outermost slot. It should be 12.3 V

Hi. I have a 2017 Mirage G4,with manual transmition. I wan't to add cruise control but I can't find C-228 component. Can't any body show me the picture where is the C-228 location? Thanks so much.

[Hmdkhan]

Hello,

I’m new to the forum. I’m trying to install cruise control in my mirage but I cant figure out how to do the wiring part.
My car has 10 pin spiral but only has connection for the horn.
I have ordered multimedia and cruise buttons. I have read that the ecu has 2 pinout for cruise apparently 93 and 94 but the cruise switch(steering) has 4 wires going in the spiral connector. How do I know which 2 wires I need to plug in the ECU Pinouts?

[FreeYourSOUL]

I have read that the ecu has 2 pinout for cruise apparently 93 and 94 but the cruise switch(steering) has 4 wires going in the spiral connector. How do I know which 2 wires I need to plug in the ECU Pinouts?

2 extra wires are for backlight, you can connect #5 wire to taillight fuse and #6 to ground.

[Hmdkhan]

Is there any positive negative sequence I need to take care of while connecting the 93 and 94 pin from the ECU?
Also is there a way to confirm which pins are for Cruise I have read some models have 63 64 pin for it

[allrock]

Is there any positive negative sequence I need to take care of while connecting the 93 and 94 pin from the ECU?
Also is there a way to confirm which pins are for Cruise I have read some models have 63 64 pin for it

for the cvt its very straight forward you just need the 10 pin clockspring and the switch, for the manual i think they posted it here,and when all the hardware is done you need to activate this features on your eng-ecu for it to work.